Published papers
Number of published data : 142
No. Classification Refereed paper Title Authorship Author Journal Volume/issue/page Publication date ISSN DOI URL
1 Paper
Yes
Historical Review on Origin and Application to Metal Fatigue of Probit and Staircase Methods and Their Future Prospects
Joint
Masatoshi KURODA, Akiyoshi SAKAIDA, Noriyasu OGUMA, Masao NAKAGAWA, Takashi MATSUMURA and Tatsuo SAKAI
材料
69/ 3, 190-196
2020/03



2 Paper
Yes
Creep endurance properties of stainless steel ultra thin plate belt under high temperature environment

松村 隆,薗部裕介,越智保雄,松田清義,三田 和彦,佐久間 優
材料試験技術
63/ 3, 11-124
2018/07



3 Paper
Yes
Endurance properties of stainless steel ultra thin plate belt

松村 隆,川原昌浩,越智保雄,松田清義,三田 和彦,佐久間 優
材料試験技術
63/ 3, 112-118
2018/07



4 Paper
Yes
鋳造アルミニウム合金の高サイクル疲労特性における異方性とレーザピーニング処理の影響

越智保雄,松村隆,鈴木佑司,政木清孝,柿内利文,佐野雄二,足立隆史
材料試験技術
56/ 1, 3-10
2011/01



5 Paper
Yes
Al合金の軸荷重下における高サイクル疲労強度および疲労き裂進展特性に及ぼすレーザピーニング処理の影響

越智保雄,松村隆,五十嵐崇亮,政木清孝,柿内利文,佐野雄二,足立隆史
材料
59/ 12, 932-937
2010/12



6 Paper
Yes
Effets of Laser Peening Treatment on High Cycle Fatigue Property of Aluminum Alloys

Y.Ochi,K,Masaki,T.Matsumura,T.Kakiuchi,Y.Suzuki,Y.Sano,T.Adachi
CD-ROM of MS&T(Materials Science & Technology)Conference 2008.
CD-ROM, 1-13
2008



7 Paper
Yes
レーザピーニングによるAC4CHアルミニウム合金の疲労き裂進展抑制

政木清孝,越智保雄,松村 隆,佐野雄二,秋田貢一,梶原堅太郎
材料
56/ 12, 1133-1138
2007/12



8 Paper
Yes
Effects of Laser Peening Treatment on High Cycle Fatgiue Properties of Degassing-Processed Cast Aluminum Alloy

K.Masaki, Y.Ochi, T.Matsumura, Y.Sano
Materials Science and Engineering A
468-470, 171-175
2007/11



9 Paper
No
Effects of Volume Fraction of Alumina Short Fibers on High Cycle Fatigue Properties of Al and Mg Alloy Composites

Y.Ochi, K.Masaki, T.Matsumura, M.Wadasako
Materials Science and Engineering A
468-470, 230-236
2007/11



10 Paper
Yes
Effects of Laser Peening Treatment on High Cycle Fatigue Properties
of Degassing-Processed cast Aluminum Alloy

K.Masaki, Y.Ochi, T.Matsumura, Y.Sano
Materials Science and Engineering A
468-470, 171-175
2007/11



11 Paper
Yes
Effects of Laser Peening on Fatigue Crack Behavior in Pre-Cracked Aluminum Alloy

Y.Ochi, K,Masaki, T.Matsumura, Y.Sano, K.Akita, K.Kajiwara
Key Engineering Materials
345-346, 255-258
2007/05



12 Paper
Yes
Small Crack Properties of Austenitic Stainless Steel with Artificial Corrosion Pit in Long Life Regime of Fatigue

K.Masaki, Y.Ochi, T.Matsumura
International Jpournal of Fatigue
28/ 11, 334-340
2006/11



13 Paper
Yes
Fatigue Strength Improvement by Peening Treatment in Degassing Processed Cast Aluminum Alloy

Y.Ochi, K.Masaki, T.Matsumura, Y.Kumagai, Y.Sano
International Journal of Modern Physics B (IJMPB)
20/ 25/27, 3593-3598
2006/10



14 Paper
Yes
溶湯処理鋳造アルミニウム合金の疲労特性に及ぼすレーザピーニング処理の影響

.政木清孝、越智保雄、熊谷洋平、松村隆、佐野雄二、内藤英樹
材料
55/ 7, 706-711
2006/07



15 Paper
Yes
High Cycle Fatigue Property and Micro Crack Propagation Behavior in Extruded AZ31 Magnesium Alloys

Y.Ochi, K.Masaki, T.Hirasawa, X. Wu, T.Matsumura, Y.Takizawa, K.Higashi
Materials Transactions
47/ 04, 989-994
2006/04



16 Paper
Yes
オーステナイト系ステンレス鋼に付与した人工腐食ピットからの疲労き裂発生・進展挙動評価

政木清孝,越智保雄,松村 隆
材料(日本材料学会)
54/ 45, 1262-1267
2005/12



17 Paper
Yes
溶湯処理鋳造アルミニウム合金の高サイクル疲労特性に及ぼすショットピーニング処理の影響

政木清孝,熊谷洋平,越智保雄,松村 隆,浜口達彦
材料(日本材料学会)
54/ 45, 1258-1261
2005/12



18 Paper
Yes
オーステンパ球状黒鉛鋳鉄の長寿命疲労特性に及ぼすショットピーニングの影響

政木清孝,越智保雄,細谷拓三郎,松村 隆
日本機械学会論文集(A編)
71/ 711, 1488-1493
2005/11



19 Paper
Yes
The Improvement of High Cycle Fatigue Properties of AC4CH Alloy with Shot Peening Treatment

K. Masaki, Y. Ochi,T. Matsumura
Key Engineering Materials-Advances in Fracture and Strength
297/ 300, 1919-1624
2005/10



20 Paper
Yes
3次元チラノ繊維強化SiC基複合材料の疲労挙動に及ぼす周波数の影響

政木清孝,越智保雄,松村隆
日本機械学会論文集(A編)
69/ 678, 390-395
2003/02



21 Paper
Yes
High-Cycle Rotating Bending Fatigue Property in Very Long-Life Regime of High Strength Steels

Y. Ochi, T. Matsumura, K. Masaki and S. Yoshida
Fatigue Fract. Engng. Mater. Struct.
25/ No.8/9, 823-830
2002/08



22 Paper
Yes
コンプライアンス法に基づくGLARE3 Fiber/Metal積層材料の疲労き裂進展特性

高松徹,下河利行,松村隆,三好良夫,田邊裕貴
日本機械学会論文集(A編)
67/ 664, 1973-1979
2001/12



23 Paper
Yes
表面SH波による疲労き裂の検出とその定量評価

燈明泰成,越智保雄,松村隆
日本機械学会論文集(A編)
67/ 661, 1508-1513
2001/09



24 Paper
Yes
Influence of Residual Stress on Super-Long Life Fatigue Properties of High Carbon Chromium Bearing Steel

T. Matsumura and Y. Ochi
Material Science Research International Special Technical Publication-1
47-52
2001/05



25 Paper
Yes
Effect of Shot-Peening Treatment on High Cycle Fatigue Property of Ductile Cast Iron

Y. Ochi K. Masaki, T. Matsumura and T. Sekino
Int. J. of Fatigue
23/ 5, 441-448
2001/05



26 Paper
Yes
半凝固鋳造アルミニウム合金の高サイクル疲労強度と疲労き裂特性

越智保雄,畠山敦,松村隆,柴田良一
日本機械学会論文集(A編)
66/ 649, 1703-1709
2000/09



27 Paper
Yes
熱・力学的繰返し条件下におけるTi-Ni-Cu形状記憶合金の疲労寿命

佐久間俊雄,岩田宇一,高久啓,仮屋房亮,越智保雄,松村隆
日本機械学会論文集(A編)
66/ 644, 748-754
2000/04



28 Paper
No
熱力学的繰返し条件下におけるTi-Ni-Cu 形状記憶合金の変形挙動に及ぼす加工率の影響

佐久間俊雄,岩田宇一,猪俣達身,越智保雄,松村 隆,朱 世杰,宮崎修一
機械学会関東支部第6期総会講演会講演論文集
000-1, 11-12
2000/03



29 Paper
No
ハードショットピーニング(HSP)処理SUS316L鋼の高サイクル疲労における内部き裂発生・進展挙動

越智保雄,明石有佐,政木清孝,松村 隆
日本機械学会論文集(A編)
66/ 642, 320-325
2000/02



30 Paper
No
オーステナイト系ステンレス鋼における加工誘起マルテンサイト量の各種定量法の検討

政木清孝,越智保雄,松村 隆
材料試験技術(日本材料試験技術協会誌)
45/ 1, 314-319
2000/01



31 Paper
No
高炭素クロム軸受鋼の広寿命域にわたる回転曲げ確率疲労特性について

酒井達雄,越智保雄,松村 隆,他31名
日本材料学会第17回材料・構造信頼性シンポジウム講演会講演論文集
21-26
1999/11



32 Paper
No
Super-Long Life Fatigue Properties and X-ray Residual Stress Measurement of High Carbon Chromium Bearing Steel

T. Matsumura and Y. Ochi
Proc. of the 2nd Int. Conf. On Advanced Materials Development and Performance(AMDP '99), Tokushima, Japan
1, 107-112
1999/11



33 Paper
No
Effect of Cu Contents and Heating Temperatures on Thermo-Mechanical Fatigue Properties of Ti-Ni-Cu Shape Memory Alloys

Y. Ochi, T. Sakuma, U. Iwata, T. Matsumura and S. Zhu
Proc. of the 2nd Int. Conf. on Advanced Materials Development and Performance(AMDP'99),Tokushima, Japan
1, 58-63
1999/11



34 Paper
No
GLARE Fiber/Metal積層材料の疲労き裂進展特性(コンプライアンス法による検討)

高松 徹,松村 隆,吉田忠志,下河利行,角田義秋,三好良夫,田邉裕貴:
第37回飛行機シンポジウム講演論文集
557-560
1999/10



35 Paper
No
表面SH波による疲労き裂の非破壊評価

燈明泰成,越智保雄,松村 隆
日本材料学会関東支部第7回機能材料工学研究会資料
1-2
1999/10



36 Paper
No
半凝固鋳造アルミニウム合金の高サイクル疲労強度と疲労き裂特性

畠山 敦,越智保雄,松村 隆
日本機械学会平成11年度材料力学部門講演会講演論文集
99-16, 587-588
1999/10



37 Paper
No
HSP処理SUS316Lの高サイクル疲労におけるき裂進展挙動

政木清孝,越智保雄,松村 隆
日本機械学会平成11年度材料力学部門講演会講演論文集
99-16, 563-564
1999/10



38 Paper
No
Fiber/Metal 積層材料GLARE3-5/4の疲労き裂進展特性評価

高松 徹,松村 隆,吉田忠志,下河利行,角田義秋,三好良夫,田邉裕貴
日本機械学会平成11年度材料力学部門講演会講演論文集
99-16, 161-162
1999/10



39 Paper
No
ショットピーニング処理フェライト・パーライト球状黒鉛鋳鉄の長寿命域高サイクル疲労特性

越智保雄,関野 健,岡崎尚平,松村 隆
日本機械学会論文集(A編)
65/ 638, 2086-2091
1999/10



40 Paper
No
HSP処理SUS316Lの残留応力分布および硬さ分布を用いた高サイクル疲労限定推定

政木清孝,越智保雄,松村 隆
材料(日本材料学会)
48/ 10, 1124-1129
1999/10



41 Paper
No
Effect of Cu Content on Fatigue Properties of Ti-Ni-Cu Shape Memory Alloys

Y. Ochi, T. Sakuma, U. Iwata, T. Matsumura and S. Zhu
Proc. of Int. Workshop on Experimental and Computational Mechanics in Engineering and Material Behaviour(ECM '99),Urumqi, China
448-452
1999/09



42 Paper
No
HSP処理SUS316Lの疲労き裂発生・進展形態のFEM解析

政木清孝,明石有佐,越智保雄,松村 隆
日本材料学会疲労部門委員会第12回表面改質材強度評価研究会資料
1-5
1999/07



43 Paper
No
小球衝突によるセラミックスの強度低下に関する研究(Al_2_O_3_+TiC平板へのAl_2_O_3_球衝突)

松村 隆,入交俊介,大串浩司,越智保雄
日本機械学会1999年度年次大会講演論文集
Ⅲ/ 99-1, 369-370
1999/07



44 Paper
No
回折SH超音波による疲労き裂の非破壊評価

燈明泰成,越智保雄,松村 隆
日本機械学会1999年度年次大会講演論文集
Ⅲ/ 99-1, 337-338
1999/07



45 Paper
No
ハイニカロン繊維強化SiC 複合材料の疲労特性に関するその場観察

金子洋平,朱 世杰,越智保雄,松村 隆,香川 豊,水野峰男
日本機械学会1999年度年次大会講演論文集
Ⅲ/ 99-1, 329-330
1999/07



46 Paper
No
HSP処理SUS316の高サイクル疲労特性と加工誘起マルテンサイト

政木清孝,斉藤雅人,越智保雄,松村 隆
日本機械学会1999年度年次大会講演論文集
Ⅲ/ 99-1, 77-78
1999/07



47 Paper
No
半凝固鋳造アルミニウム合金の高サイクル疲労強度と疲労き裂特性

畠山 敦,越智保雄,松村 隆
日本機械学会1999年度年次大会講演論文集
Ⅲ/ 99-1, 75-76
1999/07



48 Paper
No
ショットピーニング処理PDI材の高サイクル疲労特性

越智保雄,関野 健,斎藤尚之,松村 隆
日本機械学会1999年度年次大会講演論文集
Ⅲ/ 99-1, 73-74
1999/07



49 Paper
No
Ni-Cr-Mo鋼におけるフレッティング疲労強度および疲労き裂発生・進展挙動

越智保雄,高原超士,木戸陽秀,朱 世杰,松村 隆
日本機械学会1999年度年次大会講演論文集
Ⅰ/ 99-1, 251-252
1999/07



50 Paper
No
小球衝突によるセラミックスの強度低下に関する研究(Al_2_O_3_+TiCの平板へのAl_2_O_3_球衝突)

松村 隆,入交俊介,大串浩司,越智保雄
日本材料学会関東支部第6回機能材料工学研究会資料
1-2
1999/07



51 Paper
No
Fatigue Crack Growth Properties of a GLARE3-5/4 Fiber/Metal Laminate and Validity of Methods for Analyzing Results

T. Takamatsu, T. Matsumura, N. Ogura, T. Shimokawa and Y. Kakuta
For Presentation at the 20th Symp. of the Int. Committee on Aeronautical Fatigue, Washington, USA
1-22
1999/07



52 Paper
No
Experimental Study on Waveform Modulation of Diffracted SH Ultrasonic Waves for Materials Properties

H. Tohmyoh, Y. Ochi and T. Matsumura
Proc. of the Int. Conf. on Advanced Technology in Experimental Mechanics '99(ATEM '99),Ube, Yamaguchi, Japan
1, 240-245
1999/07



53 Paper
No
回析表面SH超音波を用いた表面改質材の疲労損傷評価

長島 豊,越智保雄,松村 隆
材料試験技術(日本材料試験技術協会誌)
44/ 3, 164-172
1999/07



54 Paper
No
Fatigue Crack Growth Properties of a Fiber/Metal Laminate GLARE

T. Takamatsu, T. Matsumura, N. Ogura, T. Shimokawa and Y. Kakuta
Proc. of the 7th Int. Fatigue Congress(Fatigue '99),Beijing, China
3/4, 1725-1730
1999/06



55 Paper
No
The Effect of Hard Shot-Peening on High Cycle Fatigue Properties of SUS316L Steel

K. Masaki, Y. Ochi and T. Matsumura
Proc. of the 7th Int. Fatigue Congress(Fatigue '99), Beijing, China
2/4, 1219-1224
1999/06



56 Paper
No
Fatigue Crack Growth Properties of a GLERE 3-5/4 Fiber/Metal Laminate

T. Takamatsu, T. Matsumura, N. Ogura, T. Shimokawa and Y. Kakuta
Engineering Fracture Mechanics
63/ 3, 253-272
1999/06



57 Paper
No
小球衝突によるセラミックスの強度低下に関する研究(第3報,炭化けい素平板への炭化けい素球衝突)

大串浩司,本間恭二,市川昌弘,岡部永年,松村 隆,阿部 豊
日本機械学会論文集(A編)
65/ 634, 1276-1281
1999/06



58 Paper
No
小球衝突によるセラミックスの表面損傷と残留強度の評価(第2報,窒化けい素平板への窒化けい素球衝突-弾性解析)

大串浩司,本間恭二,市川昌弘,岡部永年,松村 隆,阿部 豊
日本機械学会論文集(A編)
65/ 634, 1269-1275
1999/06



59 Paper
No
小球衝突によるセラミックスの表面損傷と残留強度の評価(第1報,窒化けい素平板への窒化けい素球衝突-実験結果)

大串浩司,本間恭二,市川昌弘,岡部永年,松村 隆,阿部 豊
日本機械学会論文集(A編)
65/ 634, 1263-1268
1999/06



60 Paper
No
高炭素クロム鋼SUJ2の超高サイクル疲労

松村 隆,越智保雄
日本材料学会疲労部門委員会第51回組織構造分科会資料
1-7
1999/05



61 Paper
No
HSP処理SUS304材の高サイクル疲労特性および疲労限度推定

政木清孝,越智保雄,松村 隆
日本材料学会第48期学術講演会講演論文集
205-206
1999/05



62 Paper
No
高炭素クロム鋼の超長寿命疲労特性とX線残留応力測定

松村 隆,越智保雄
日本材料学会第48期学術講演会講演論文集
183-184
1999/05



63 Paper
No
オーステナイト系ステンレス鋼に対するハードショットピーニング処理の影響とX線回析測定

政木清孝,越智保雄,松村 隆
日本機械学会材料力学部門第6回実験力学先端技術研究会資料
1-14
1999/04



64 Paper
No
Suitable Sample Area and Number of Divisions in the Estimation of the Maximum Crack Length by Extreme Value Analysis(Evaluation of Estimation Accuracy Independent of Distribution Forms)

T. Matsumura and M. Ichikawa
Materials Science Research International(The Society of Materials Science, Japan)
5/ 1, 21-27
1999/03



65 Paper
No
The Effect of Hard Shot-Peening of High Cycle Fatigue Properties of SUS316L Steel (Evaluation of Surface Roughness Effects Using the Annealing Method)

政木清孝,燈明泰成,越智保雄,松村 隆
Transactions of the Japan Society of Mechanical Engineers
65/ 630, 334-339
1999/02



66 Paper
No
Fatigue Crack Growth Characteristics of a Fiber/Metal Laminate GLARE

高松 徹,松村 隆,小倉紀男,下河利行,角田義秋
Transactions of the Japan Society of Mechanical
65/ 630, 306-311
1999/02



67 Paper
No
Elastic/Plastic Deformation Analysis in Ceramics due to Sphere Indentation Csi3N4 Sphere Indentation to Si3N4 Specimen-Case of Elastic/Plastic Condition)

大串浩司,本間恭二,市川昌弘,岡部永年,高松 徹,松村 隆,阿部 豊
Transactions of the Japan Society of Mechanical Engineers
64/ 619, 681-688
1998



68 Paper
No
Evaluation of Sphere Indentation Damage and Residual Strength in Ceramics(SiC Sphere Indentation to SiC Specimen-Case of Elastic Condition)

大串浩司,本間恭二,市川昌弘,岡部永年,高松 徹,松村 隆,阿部 豊
Transactions of the Japan Society of Mechanical Engineers
64/ 619, 675-680
1998



69 Paper
No
Suitable Sample Area and Number of Division in Estimation of Maximum Crack Length by Extreme Value Analysis(Evaluation of Estimation Accuracy for the Case When Crack Lengths Follow a Weibull Distribution)


Journal of the Society of Materials Science, Japan
47/ 3, 312-318
1998



70 Paper
No
Evaluation of Sphere Indentation Damage and Residual Strength in Ceramics

大串浩司,松村 隆,本間恭二,市川昌弘,岡部永年,高松 徹,阿部 豊
日本材料学会第16回材料・構造信頼性シンポジウム講演会講演論文集
70-74
1998/12



71 Paper
No
Estimation Accuracy of Maximum Crack Length by Extreme Value Analysis (Factor of Difference in Estimation Accuracy between Theoretical Analysis and Monte Carlo Simulation)

松村 隆,市川昌弘
Journal of the Society of Materials Science, Japan
47/ 12, 1227-1232
1998/12



72 Paper
No
Ni-Cr-Mo鋼のフレッティング疲労強度とその損傷評価

高原超士,越智保雄,松村 隆
日本機械学会平成10年度材料力学部門講演会講演論文集
A/ 98-5, 269-271
1998/11



73 Paper
No
ハードショットピーニング(HSP)処理SUS316L材の高サイクル疲労における内部き裂発生(FEM応力解析による考察)

明石有佐,政木清孝,越智保雄,松村 隆
日本機械学会平成10年度材料力学部門講演会講演論文集
A/ 98-5, 263-264
1998/11



74 Paper
No
HSP処理SUS316Lの残留応力分布および硬さ分布を用いた高サイクル疲労強度推定

政木清孝,越智保雄,松村 隆
日本材料学会第24回疲労シンポジウム講演論文集
129-132
1998/10



75 Paper
No
ショットピーニング処理FPDIの長寿命域および短寿命域の疲労破壊形態

越智保雄,松村 隆,関野 健
日本材料学会第24回疲労シンポジウム講演論文集
55-58
1998/10



76 Paper
No
Fatigue Crack Growth Properties of a GLARE3-5/4 Fiber/Metal Laminate

高松 徹,松村 隆,小倉紀男,下河利行,角田義秋
Technical Report of National/Aerospace Laboratory, NALTR-1366

1998/10



77 Paper
No
Evaluation of Surface Damage and Residual Strength in Ceramics due to Sphere Impact

大串浩司,松村 隆,越智保雄,本間恭二,市川昌弘,岡部永年,阿部 豊
日本材料学会第24回疲労シンポジウム講演論文集
230-233
1998/10



78 Paper
No
疲労き裂伝ぱ速度および最大き裂長さの推定に関する信頼性工学的研究

松村 隆
電気通信大学,博士学位論文

1998/09



79 Paper
No
Evaluation of Fatigue Damage by Surface SH Wave in Carbon Steel

Y. Nagashima, Y. Ochi and T. Matsumura
Proc. of the 11th Int. Conf. on Experimental Mechanics(ICEM '98)Oxford, U. K.
2, 1047-1052
1998/08



80 Paper
No
Fracture Strength of a Thin Film in a Ceramics Film-Substract System

高松 徹,市川昌弘,松村 隆,河崎達也
Journal of the Society of Materials Science, Japan
47/ 8, 819-824
1998/08



81 Paper
No
表面SH超音波による表面改質材の疲労損傷評価.

長島 豊,越智保雄,松村 隆
日本材料学会関東支部第4回機能材料工学研究会資料
1-6
1998/07



82 Paper
No
ショットピーニング処理FPDI材の高サイクル疲労特性

関野 健,越智保雄,松村 隆
日本材料学会疲労部門委員会第9回表面改質材の強度評価分科会・第49回組織構造分科会合同分科会資料
1-6
1998/07



83 Paper
No
Fatigue Crack Growth Properties of a GLARE 3-5/4 Fiber/Metal Laminate

T. Takamatsu, T. Matsumura Ogura, T. Shimokawa and Y. Kakuta
Technical Report of National Aerospace Labortaory, NALTR-1368T

1998/07



84 Paper
No
表面SH超音波による表面改質材の材料損傷評価

長島 豊,越智保雄,松村 隆
日本材料学会第47期学術講演会講演論文集
205-206
1998/05



85 Paper
No
Evaluation of Surface Damage and Residual Strength in Ceramics due to Sphere Impact (Al2O3 Sphere Impact to Al2O3+TiC Specimen-Case of Elastic Condition)

松村 隆,大串浩司,入交俊介,越智保雄
日本材料学会第47期学術講演会講演論文集
319-320
1998/05



86 Paper
No
The Accuracy of Estimation of Maximum Crock Length by Statistics of Extremes(The Comparison of a theoretical and Monte Carlo Simulation)


日本材料学会第15回材料・構造信頼性シンポジウム講演会講演論文集
24-29
1997



87 Paper
No
Fatigue Crack Growth Characteristics of Fiber/Metal Laminate


Proceedings of the 35th Aircraft Symposium
321-324
1997



88 Paper
No
Fatigue Crack Growth Characteristics of Fiber/Metal Laminate


Proceeding of the 74th JSME Spring Annual Meeting(II)
97-1, 480-481
1997



89 Paper
No
The Accuracy of Estimation of the Maximum Crack Length by Statistics of Extremes(Examination of Modification of Estimated Value of Maximum Crack Length)


Proceeding of the 74th JSME Spring Annual Meeting(II)
97-1, 199-200
1997



90 Paper
No
Strength Degradation in Ceramics by Sphere Indentation(Si3N4 Sphere Indentation of Si3N4 Specimen-Case of Elastic Condition)


Transactions of the Japan Society of Mechanical Engineers
63/ 606, 392-398
1997



91 Paper
No
Sutable Sample Area and Number of Division in Estimation of the Maximum Crack Length by Extreme Value Analysis(Evaluation of Estimation Accuracy for the Case When Crack Lengths Follow a Weibull Distribution)


日本材料学会第14回材料・構造信頼性シンポジウム講演会講演論文集
19-24
1996



92 Paper
No
The Guide for Determining Sample and Number of Division in Estimation of the Maximum Inclusion Size by Statistics of Extremes


Proceeding of the 73nd JSME Spring Annual Meeting
((]G0002[))/ 96-1, 223-224
1996



93 Paper
No
The Accuracy of Estimation of the Maxmam Crack Length by Statistics of Extremes (The Case When Individual Crack Length Follows a Weibull Distribution)


Proceeding of the 1995 Annual Meeting of JSME/MMD
A/ 95-2, 461-462
1995



94 Paper
No
Suitable Sample Area and Number of Division in Estimation of Maximum Crack Length by Extreme Value Analysis (Evaluation of Estimation Accuracy Independent of Didtribution Forms)

松村隆,市川昌弘
Journal of the Society of Materials Science,Japan
44/ 500, 540-545
1995



95 Paper
No
The Accuracy of Estimation of the Maximum Crack Length by Statistics of Extremes (The Comparison of a Theoretical Analysis and Monte Carlo Simulation)


Proceeding of the 72nd JSME Spring Annual Meeting
II/ 95-1, 232-233
1995



96 Paper
No
A Guide for Determining Sample Area and Number of Division in Estimation of the Maximum Crack Length by Statistics of Extremes (The Case When Individual Crack Length Follows a Weibull Distribution)


Proceedings of the 1994 Annual Meeting of JSME/MMD
A/ 940-37, 410-411
1994



97 Paper
No
Consideration of Volume Dependence of the Lower Bound of Strength Distribution of Ceramics (The Case of Three-Parameter Weibull Distribution


Proceedings of the 71st JSME Spring Annual Meeting
II/ 940-10, 517-519
1994



98 Paper
No
Estimation of the Maximum Crack Length in Creep-Fatigue of SUS316L Based on Statistics of Extremes and Image Processing.


JSME International Journal
36/ 1, 121-125
1993



99 Paper
No
Reliability Engineering Approach to Fatigue Crack Growth Rate in High Strength Steel HT60 by DC Electrical Potential Method


Jounal of the Society of Materials Science, Japan
41/ 464, 637-642
1992



100 Paper
No
Statistical Experiment on Fatigue Grack Growth Rate Using DC Electrical Potential Method and Examination of Stochastic Models


Journal of the Society of Materials Science, Japan
40/ 450, 283-288
1991



101 Paper
No
Measurement of Short Crack Lengths Under Creep-Fatigue Condition by Means of Image Processing gineers(Series A)


Transactions of the Japan Society of Mechanical Engineers
57/ 537, 1110-1115
1991



102 Paper
No
Reliability Engineering Approach to Fatigue Crack Growth Rate Using DC Electrical Potential Method(Development of DC Electrical Potential System and preliminary Experiments)


Journal of the Society of Materials Science, Japan
37/ 420, 1010-1016
1988



103 International conference proceedings, etc.
No
Expansion of JSMS Database on Fatigue Strength of Metallic Materials as to Include VHCF Data
Joint
T. Sakai1, A. Sakaida, A. Ueno, K. Okada, Y. Nakamura, K. Hanaki, K. Mukoyama, N. Oguma, T. Nakamura, T. Matsumura, H. Oguma, Y. Shimamura
Proc. of Seventh International Conference on Very High Cycle Fatigue (VHCF7)
432-440
2017/07



104 International conference proceedings, etc.
No
Data acquisition for very high cycle fatigue of non-ferrous metallic materials based on the collaborative research in JSMS - 4th report: basic research of VHCF properties of extruded magnesium alloy under rotary bending loading
Joint
K. Masaki, T. Matsumura, H. Akebono, T. Kakiuchi, Y. Nakamura, Y. Uematsu
Proc. of Seventh International Conference on Very High Cycle Fatigue (VHCF7)
211-216
2017/07



105 International conference proceedings, etc.
No
Data acquisition for very high cycle fatigue of non-ferrous metallic materials based on the collaborative research in JSMS - 3rd report: Effects of loading type and test frequency on VHCF properties of beta Ti22V4Al alloy
Joint
. Oguma, T. Nakamura, A. Ueno, T. Matsumura, K. Masaki, H. Akebono, Y. Uematsu, N. Oguma, T. Kakiuchi, Y. Shimamura
Proc. of Seventh International Conference on Very High Cycle Fatigue (VHCF7)
205-210
2017/07



106 International conference proceedings, etc.
No
Data acquisition for very high cycle fatigue of non-ferrous metallic materials based on the collaborative research: effects of loading type, test environment, surface treatment and casting defects on VHCF properties of ADC12 aluminum die-casting alloy
Joint
A. Ueno, T. Matsumura, K. Masaki, T. Ogawa, K. Shiozawa, Y. Nakamura, T. Nishida
Proc. of Seventh International Conference on Very High Cycle Fatigue (VHCF7)
199-204
2017/07



107 International conference proceedings, etc.
No
Data acquisition for very high cycle fatigue of non-ferrous metallic materials based on the collaborative research in JSMS - 1st report: outline of round-robin experiments on aluminum die casting, beta titanium, and extruded magnesium alloys -
Joint
T. Nakamura, A. Ueno, T. Matsumura, K. Masaki, H. Oguma, H. Akebono, T. Kakiuchi, S. Kikuchi, Y. Nakamura, T. Nishida, T. Ogawa, N. Oguma, T. Sakai, Y. Shimamura, K. Shiozawa, Y. Uematsu
Proc. of Seventh International Conference on Very High Cycle Fatigue (VHCF7)
168-174
2017/07



108 International conference proceedings, etc.
No
Expansion of JSMS Database on Fatigue Strength of Metallic Materials as to Include VHCF Data
Joint
T. Sakai1, A. Sakaida, A. Ueno, K. Okada, Y. Nakamura, K. Hanaki, K. Mukoyama, N. Oguma, T. Nakamura, T. Matsumura, H. Oguma, Y. Shimamura
Proc. of Seventh International Conference on Very High Cycle Fatigue (VHCF7)
CD-ROM, 1-6
2017/07/03



109 International conference proceedings, etc.
No
Effects of loading type and test frequency on VHCF properties of beta Ti22V4Al alloy
Joint
H. Oguma, T. Nakamura, A. Ueno, T. Matsumura, K. Masaki, H. Akebono, Y. Uematsu, N. Oguma, T. Kakiuchi, Y. Shimamura, Y. Nakamura
Proc. of Seventh International Conference on Very High Cycle Fatigue (VHCF7)
CD-ROM, 1-6
2017/07/03



110 International conference proceedings, etc.
No
Effects of loading type, test environment, surface treatment and casting defects on VHCF properties of ADC12 aluminum die-casting alloy
Joint
A. Ueno, T. Matsumura, K. Masaki, T. Ogawa, K. Shiozawa, Y. Nakamura, T. Nishida
Proc. of Seventh International Conference on Very High Cycle Fatigue (VHCF7)
CD-ROM, 1-6
2017/07/03



111 International conference proceedings, etc.
No
Data acquisition for very high cycle fatigue of non-ferrous metallic materials based on the collaborative research in JSMS - 1st report: outline of round-robin experiments on aluminum die casting, beta titanium, and extruded magnesium alloys -
Joint
T. Nakamura, A. Ueno, T. Matsumura, K. Masaki, H. Oguma, H. Akebono, T. Kakiuchi, S. Kikuchi, Y. Nakamura, T. Nishida, T. Ogawa, N. Oguma, T. Sakai, Y. Shimamura, K. Shiozawa, Y. Uematsu
Proc. of Seventh International Conference on Very High Cycle Fatigue (VHCF7)
CD-ROM, 1-6
2017/07/03



112 International conference proceedings, etc.
Yes
Laser and Shot Peening Effects on High Cycle Fatigue Property in Austenitic Stainless Steel

Y.Ochi,K.Masaki,T.Matsumura and Y.Sano
The 7th EUROMECH Solid Mechanics Conf. (ESMC2009)
CD-ROM
2009/09



113 International conference proceedings, etc.
Yes
Effects of Laser Peening Treatment on High Cycle Fatigue and Crack Propagation Behaviors in Austenitic Stainless Steel

Y.Ochi,K.Masaki,T.Matsumura, T.Ikarashi and Y.Sano
The 17th Inter. Conf. on Nuclear Engng., (ICONE17)
CD-ROM
2009/07



114 International conference proceedings, etc.
Yes
Fracture Strength of Porous Ceramics by Sphere Indentation

Y.Itabashi, T.Matsumura, Y.Ochi
Proc. of Inter. Conf. on Advanced Technology on Experimental Mechanics 2007(ATEM’07)
CD=ROM, 1-6
2007/09



115 International conference proceedings, etc.
Yes
Retardation of Fatgiue Crack Growth on AC4CH Cast Aluminum Alloy by Laser Peening

K.Masaki, Y.Ochi, T.Matsumura, Y.Sano
Inter. Symp. On Advanced Technology on Experimental Mechanics 2007 (ATEM’07)
CD-ROM, 1-6
2007/09



116 International conference proceedings, etc.
Yes
Fracture Strength of Porous Ceramics by Sphere Indentation

Y.Itabashi, T.Matsumura, Y.Ochi
Proc. of Inter. Conf. on Advanced Technology on Experimental Mechanics 2007(ATEM’07)
CD-ROM(OS16-5-5), 1-6
2007/09



117 International conference proceedings, etc.
Yes
etardation of Fatigue Crack Growth on AC4CH Cast Aluminum Alloy by Laser Peening

K.Masaki, Y.Ochi, T.Matsumura, Y.Sano
Proc. of Inter. Conf. on Advanced Technology on Experimental Mechanics 2007(ATEM’07)
CD-ROM(OS4-2-2), 1-6
2007/09



118 International conference proceedings, etc.
Yes
Effects of Shot Peening Treatment on Very High Cycle Fatigue Property in Austempered Ductile Cast Iron

Y.Ochi, K.Masaki, T.Matsumura, T.Hosoya
Proc. of the Fourth Inter. Conf. on Very High Cycle Fatigue(VHCF-4)
1, 281-287
2007/08



119 International conference proceedings, etc.
Yes
Effects of Surface Finishing and Tempering Temperature on Very High Cycle Fatigue Property in High Strength Steels

T.Matsumura, Y.Ochi, K.Masaki
Proc. of the Fourth Inter. Conf. on Very High Cycle Fatogue(VHCF-4)
1, 187-193
2007/08



120 International conference proceedings, etc.
Yes
Effects of Shot Peening Treatment on Very High Cycle Fatigue Property in Austempered Ductile Cast Iron

Y.Ochi, K.Masaki, T.Matsumura, T.Hosoya,
Proc. of the Fourth Inter. Conf. on Very High Cycle Fatigue(VHCF-4)
1, 281-287
2007/08



121 International conference proceedings, etc.
Yes
Effects of Surface Finishing and Tempering Temperature on Very High Cycle Fatigue Property in High Strength Steels

T.Matsumura, Y.Ochi, K.Masaki
Proc. of the Fourth Inter. Conf. on Very High Cycle Fatogue(VHCF-4)
1, 187-193
2007/08



122 International conference proceedings, etc.
No
Effects of Laser Peening Treatment on High Cycle Fatigue Property of Degassed Processed Cast Aluminum Alloy

K. Masaki, Y.Ochi, T. Matsumura, Y. Sano
CD-ROM of a Symposium in Honor of Prof Art McEvily's 80th Birthday, Fatigue and Fracture of Traditional and Advanced
25-
2006/03



123 International conference proceedings, etc.
No
Effects of Degassing Process on High Cycle Fatigue Property in Casting Aluminum Alloy

Y. Ochi, K. Masaki, T. Matsumura, Y.Kumagai and T. Hamaguchi
CD-ROM of ICF XI
5016-
2005/03



124 International conference proceedings, etc.
No
The Improvement of High Cycle Fatigue Properties of AC4CH Alloy with Shot Peening Treatment

K. Masaki, Y. Ochi and T. Matsumura
Proc. of Asian Pacific Conference for Fracture and Strrength `04
185-
2004/10



125 International conference proceedings, etc.
No
Effect of Shot-Peening Treatment on Very Long Life Fatigue Property in Ductile Cast Iron

Y. Ochi, T. Hosoya, K. Masaki, T. Matsumura and T. Sekino
Proc. of the 2nd Int. Symp. on Environmentally Conscious Design and Inverse Manufacturing (Eco Design 2001)
1, pp.444-449, Tokyo, Japan
2001/12



126 International conference proceedings, etc.
No
Influence of Residual Stress on Super-Long Life Fatigue Properties of High Strenth Steel SCNM439

T. Matsumura, Y. Ochi, S. Yoshida and K.Masaki
Proc. of the 10th International Conference on Fracture (ICF10)
p.628, Hawaii, USA-
2001/12



127 International conference proceedings, etc.
No
Estimation of High Cycle Fatigue Limit of Hard Shot Peened Austenitic Stainless Steel

K. Masaki, Y. Ochi and T. Matsumura
Proc. of the 10th International Conference on Fracture (ICF10)
p.588, Hawaii, USA-
2001/12



128 International conference proceedings, etc.
Yes
Effect of Grain Size on the Strength Characteristics of the Thin Sheets of SUS304 Stainless Steels

A. Tanaka, T. Matsumura, K. Masaki and Y. Ochi
Proc. of APCFS & ATEM'01
2, pp.868-872, Sendai, Japan
2001/10



129 International conference proceedings, etc.
Yes
Initiation and Propagation Behavior of High Cycle Fatigue Cracks on HSP-Treated Type 316L Steel

K. Masaki, Y. Ochi and T. Matsumura
Proc. of APCFS & ATEM'01
1, pp.422-427, Sendai, Japan
2001/10



130 International conference proceedings, etc.
Yes
Study on Detection and Quantitative Evaluation of Fatigue Cracks Using Surface SH Waves

H. Tohmyoh, Y. Ochi and T. Matsumura
Proc. of APCFS & ATEM'01
1, pp.204-209, Sendai, Japan
2001/10



131 International conference proceedings, etc.
No
High Cycle Rotating Bearing Fatigue Property in Very Long Life Regime of High Strength Steels

Y. Ochi, T. Matsumura, K. Masaki and S. Yoshida
Pro. of the Int. Conf. on Fatigue in the Very High Cycle Regime
1, pp.81-88, Vienna, Austria
2001/07



132 International conference proceedings, etc.
No
Application of a Compliance Method to Fatigue Crack Growth Analysis of GLARE3 Fiber/Metal Laminates

T. Takamatsu, T. Shimokawa and T. Matsumura
Design for Durability in the Digital Age, Pro. of the 21th Symp. of the International Committee Aeronautical Fatigue (ICAF2001)
Vol.II, pp.913-928, Toulouse, France
2001/06



133 International conference proceedings, etc.
No
Effect of Contact Pat Geometry on Fretting Fatigue Behavior of High Strength Steel

Y. Ochi, Y. Kido, T. Akiyama and T. Matsumura
Abstracts of the 3rd Inter. Symp. on Fretting Fatigue
1, P.54, Nagaoka, Japan-
2001/05



134 International conference proceedings, etc.
No
Long Life Fatigue Properties of Ferrite-Pearlitic Ductile Cast Iron with Shot-Peening Treatment

Y.Ochi, T.Sekino and T.Matsumura
CD-ROM of the 13th European Conference on Fracture (ECF 13)
3C.97, pp.1-6, San Sebastian, Spain
2000/09



135 International conference proceedings, etc.
No
Long Life Fatigue Properties of Ferrite-Pearlitic Ductile Cast Iron with Shot-Peening Treatment

Y.Ochi, T.Sekino and T.Matsumura
Abstracts Volume of the 13th European Conference on Fracture (ECF 13)
pp.194, San Sebastian, Spain-
2000/09



136 International conference proceedings, etc.
No
Effect of Cu Content on Thermo-Mechanical Fatigue Properties and Total Available Strain Energy of Ti-Ni-Cu Shape Memory Alloy

H.Takaku, T.Sakuma, U.Iwata, Y.Ochi, T.Matsumura, S.Zhu and S.Miyazaki
CD-ROM of the 13th European Conference on Fracture (ECF 13)
11A.290, pp.1-7, San Sebastian, Spain
2000/09



137 International conference proceedings, etc.
No
Effect of Cu Content on Thermo-Mechanical Fatigue Properties and Total Available Strain Energy of Ti-Ni-Cu Shape Memory Alloy

H.Takaku, T.Sakuma, U.Iwata, Y.Ochi, T.Matsumura, S.Zhu and S.Miyazaki
Abstracts Volume of the 13th European Conference on Fracture (ECF 13)
pp.209, San Sebastian, Spain-
2000/09



138 International conference proceedings, etc.
No
Effect of Cold Working Ratio on Thermo-Mechanical Cyclic Behavior and Fatigue Life of Ti-41.7at%Ni-8.5at%Cu Shape Memory Alloy

T.Sakuma, H.Takaku, U.Iwata, T.Inomata, Y.Ochi, T.Matsumura, S.Zhu and S.Miyazaki
CD-ROM of the 13th European Conference on Fracture (ECF 13)
11A.289, pp.1-8, San Sebastian, Spain
2000/09



139 International conference proceedings, etc.
No
Effect of Cold Working Ratio on Thermo-Mechanical Cyclic Behavior and Fatigue Life of Ti-41.7at%Ni-8.5at%Cu Shape Memory Alloy

T. Sakuma, H. Takaku, U. Iwata, T. Inomata, Y. Ochi, T. Matsumura, S. Zhu and S. Miyazaki
Abstracts Volume of the 13th European Conference on Fracture (ECF 13)
p.55, San Sebastian, Spain-
2000/09



140 International conference proceedings, etc.
No
Evaluation of Residual Strength in Ceramics due to Sphere Impact

T. Matsumura, Y. Ochi, K. Ohgushi and S.Irimajiri
Pro. of the SEM IX Int. Congress on Experimental Mechanics (SEM IX)
1, pp.707-710, Florida, USA
2000/06



141 International conference proceedings, etc.
No
Evaluation of Fatigue Properties on Shot-peening Treated Ductile Cast Irons

Y. Ochi, T. Sekino, T. Matsumura and K. Masaki
Pro. of the SEM IX Int. Congress on Experimental Mechanics (SEM IX)
1, pp.42-45, Florida, USA
2000/06



142 International conference proceedings, etc.
No
Fatigue Crack Growth Properties of a GLARE3-5/4 Fiber/Metal Laminate and Validity of Methods for Analyzing Results

T.Takamatsu, T.Matsumura, N.Ogura, T.Shimokawa and Y.Kakuta
Pro. of the 20th Symp. of the International Committee Aeronautical Fatigue (ICAF'99)
II, pp.841-860, Washingtoin, USA
1999/07