論文
公開件数:231件
No. 種別 査読の有無 標題 単著・共著区分 著者 誌名 巻号頁 出版日 ISSN DOI URL
1 国際会議プロシーディングス等

Japanese and German Cases by Life Cycle Option Selection for Material-based CO2 Saving Rate and Cost
共著
Jaeho Han, Kazuki Yoda, Hayate Irie, Yuki Kinoshita, Tetsuo Yamada, Comparison of Korean
Northeast Decision Sciences Institute 2020 Annual Conference (NEDSI2020),Cambridge, USA
in printing
2020/03



2 国際会議プロシーディングス等

Effect of Rotation on Factor Analysis for Parenting Stress in Japanese Working Mothers
共著
Michika Kato, Tetsuo Yamada, Eri Ohto-Fujita, Seiko Taki
Northeast Decision Sciences Institute 2020 Annual Conference (NEDSI2020), Cambridge, USA
in printing
2020/03



3 国際会議プロシーディングス等

A Statistical Approach Identifying Parenting Stress Indexes for Japanese Mothers by Factor and Cluster Analysis
共著
Michika Kato, Tetsuo Yamada, Eri Ohto-Fujita, Seiko Taki
The 20th Asia Pacific Industrial Engineering and Management Systems (APIEMS2020), Kanazawa, Japan, Organized Session
277-282
2019/12



4 国際会議プロシーディングス等

Concept of Health Support Tool for Work-Life Balance by “Body-Mind Integrative Science” Approach
共著
Eri Ohto-Fujita, Yoriko Atomi, Miho Shimizu, Yoshikazu Higashi, Seiko Taki, Tetsuo Yamada
The 20th Asia Pacific Industrial Engineering and Management Systems (APIEMS2020), Kanazawa, Japan, Organized Session
359-364
2019/12



5 国際会議プロシーディングス等

A SNS Analysis of Japanese Manufacturers Using Text Mining
共著
Yuta Kitano, Tetsuo Yamada, Kim Hua Tan
The 20th Asia Pacific Industrial Engineering and Management Systems (APIEMS2020), Kanazawa, Japan, Organized Session
784-789
2019/12



6 国際会議プロシーディングス等

Collaboration Method of Single-vendor Multi-buyer Supply Chain using Multi-player Linear Physical Programming
共著
Tomoaki Yatsuka, Aya Ishigaki, Yuki Kinoshita, Tetsuo Yamada, Masato Inoue
The 20th Asia Pacific Industrial Engineering And Management Systems (APIEMS2020), Kanazawa, Japan, Organized Session
818-823
2019/12



7 国際会議プロシーディングス等

An Analysis of Occupational Stressors for Healthcare Workers
共著
Yating Yu, Seiko Taki, Masato Takanokura, Tetsuo Yamada, Masaru Kawakami
The 20th Asia Pacific Industrial Engineering And Management Systems (APIEMS2020), Kanazawa, Japan, Organized Session
--
2019/12



8 国際会議プロシーディングス等

Analysis of Economical Material-Based GHG Recovery and Reduction by Integrated Supplier and Disassembly Part Selections: Cell Phone Case Study
共著
Hayate Irie, Yuki Kinoshita, Tetsuo Yamada
Proceedings of EcoDesign 2019 (EcoDesign2019), Yokohama, Japan
693-698
2019/11



9 国際会議プロシーディングス等

Decision Support Method for Planning Upgrade Cycle and Designing Product Architecture of Upgradable Product Service System
共著
Yamada Shuho, Miyajima Shogo, Hasebe Rina, Yamada Tetsuo, Bracke Stefan, Masato Inoue
Proceedings of EcoDesign (EcoDesign 2019), Yokohama, Japan
353-358
2019/11



10 国際会議プロシーディングス等

Design Problem of Economic Carbon Recovery and Reduction by Integrated Supplier and Disassembly Part Selections
共著
Hayate Irie, Yuki Kinoshita, Tetsuo Yamada
17th Global Conference on Sustainable Manufacturing (GCSM2019), Shanghai, China
-
2019/10



11 一般論文

Staff Scheduling and Work Allocation Considering Physical Workload in Senior Daytime Care Facility
共著
Ryohei Matsumoto, Tetsuo Yamada, Masato Takanokura
Journal of Japan Industrial Management Association
(in press)
2020



12 一般論文

Design of Disassembly-to-Order System for Reused Components and Recycled Materials Using Linear Physical Programming
共著
Yuki Kinoshita, Tetsuo Yamada, Surendra M. Gupta
International Journal of Sustainable Manufacturing
4/ 2/3/4, 121-149
2020



13 一般論文

Disassembly System Design and Analysis with Environmental and Economic Parts Selection Using Life Cycle Inventory Database by Input-Output Tables
共著
Tetsuo Yamada, Yusuke Suzuki, Yuki Kinoshita, Norihiro Itsubo, Tadayuki Masui, Masato Inoue
International Journal of Sustainable Manufacturing
4 (in press)/ 2/3/4
2020



14 一般論文

作業の自動化難易度を考慮した人とロボットのハイブリッド組立ライン設計に関する事例研究
共著
宮内孝, 山田哲男
日本設備管理学会誌
32/ 2
2020/07



15 一般論文

Rehabilitation Staff Scheduling in Senior Daytime Care Facility with Feeling of Physical/Mental Workloads and Movements
共著
Ryohei Matsumoto, Tetsuo Yamada, Yong-Hong Kuo, Masato Takanokura
Journal of Advanced Mechanical Design, Systems, and Manufacturing
14/ 3 (in press)
2020/07



16 一般論文

Decision Support Model of Environmentally Friendly and Economical Material Strategy for Life Cycle Cost and Recyclable Weight
共著
Yuki Kinoshita, Tetsuo Yamada, Surendra M. Gupta , Aya Ishigaki, Masato Inoue
International Journal of Production Economics
224/ Article 107545
2020/06

10.1016/j.ijpe.2019.107545

17 一般論文

材料提案機能を持つ温室効果ガスと調達コストの意思決定支援ツール開発
共著
梅田浩平, 近藤礼奈, 木下雄貴, 山田哲男, 山田周歩, 井上全人
設計工学
55/ 4, 277-294
2020/04

10.14953/jjsde.2019.2852

18 一般論文

A Modular Design Strategy Considering Sustainability and Supplier Selection
共著
Masato Inoue, Shuho Yamada, Shogo Miyajima, Katsuhide Ishii, Rina Hasebe, Kazuhiro Aoyama, Tetsuo Yamada, Stefan Bracke
Journal of Advanced Mechanical Design, Systems, and Manufacturing
14/ 2, 1-10
2020/03/23

10.1299/jamdsm.2020jamdsm0023

19 一般論文

Decision Support Model for Economical Material Carbon Recovery and Reduction by Connecting Supplier and Disassembly Part Selections
共著
Hayate Irie, Tetsuo Yamada
Journal of Advanced Mechanical Design, Systems, and Manufacturing
14/ 2, 1-16
2020/03/23



20 一般論文

Designing Reverse Supply Chain Network with Costs and Recycling Rate by Using Linear Physical Programming
共著
Hiromasa Ijuin, Yuki Kinoshita, Tetsuo Yamada , Aya Ishigaki, Masato Inoue
International Journal of Smart Computing and Artificial Intelligence
3/ 2, 57-76
2019/11



21 一般論文

アップグレード製品・サービスシステム設計のためのライフサイクルオプション適合性評価手法の提案
共著
山田周歩, 金田郁可, 山田哲男, 井上全人
設計工学
54/ 9, 595-610
2019/09



22 一般論文

The Impact of BREXIT on Designing a Material-Based Global Supply Chain Network for Asian Manufacturers
共著
Kengo Nakamura, Tetsuo Yamada, Kim Hua Tan
Management of Environmental Quality
30/ 5, 980-1000
2019/08

10.1108/MEQ-12-2018-0206

23 一般論文

Control Method of Effect of Robust Optimization in Multi-Player Multi-Objective Decision-Making
共著
Tomoaki Yatsuka, Aya Ishigaki, Yuki Kinoshita, Tetsuo Yamada, Masato Inoue
American Journal of Operations Research
9/ 4, 175-191
2019/07

10.4236/ajor.2019.94011

24 一般論文

Green Procurement Decisions with Carbon Leakage by Global Suppliers and Order Quantities under Different Carbon Tax
共著
Rena Kondo, Yuki Kinoshita, Tetsuo Yamada
Sustainability
11/ 13
2019/07

10.339,0/su11133710

25 一般論文

Life Cycle Option Selection of Disassembly Parts for Material-based CO2 Saving Rate and Recovery Cost: Analysis of Different Market Value and Labor Cost for Reused Parts in German and Japanese Cases
共著
Shota Hasegawa, Yuki Kinoshita, Tetsuo Yamada, Stefan Bracke
International Journal of Production Economics
213, 229-242
2019/07

10.1016/j.ijpe.2019.02.019

26 一般論文

Design and Analysis of Global Supply Chain Network with Trans-Pacific Partnership under Fluctuating Material Prices
共著
Kengo Nakamura, Hiromasa Ijuin, Tetsuo Yamada , Aya Ishigaki, Masato Inoue
International Journal of Smart Computing and Artificial Intelligence
3/ 1, 17-34
2019/05



27 一般論文

回収率とリサイクル率を考慮した循環型サプライチェーンネットワークの設計
共著
石井美帆, 中村謙吾, 山田哲男, 井上全人
日本設備管理学会誌
31/ 1, 1-13
2019/04/22



28 一般論文

A Scientific and Economic View on Collaboration, Balancing vs. Sharing
共著
Masayuki Matsui, Tetsuo Yamada, Masato Takanokura
Theoretical Economics Letters
9/ 1, 49-59
2019/02

10.4236/tel.2019.91005

29 一般論文

GHG排出量とコストを持つグローバル調達における発注量決定法
共著
近藤礼奈, 木下雄貴, 山田哲男, 伊坪徳宏, 井上全人
日本設備管理学会誌
30/ 4, 101-110
2019/02



30 一般論文

A Conceptural Framework for Resposible Innovation
共著
Kim Hua Tan, Tetsuo Yamada
Journal of Japanese Management
3/ 1, 22-29
2018/11



31 一般論文

Disassembly Reuse Part Selection for Recovery Rate and Cost with Lifetime Analysis
共著
Shota Hasegawa, Yuki Kinoshita, Tetsuo Yamada, Masato Inoue, Stefan Bracke
International Journal of Automation Technology
12/ 6, 822-832
2018/11

10.20965/ijat.2018.p0822

32 一般論文

環太平洋経済連携協定を持つグローバルサプライチェーンネットワークのモデル化
共著
中村謙吾, 伊集院大将, 山田哲男, 石垣綾, 井上全人
日本設備管理学会誌
30/ 3, 1-14
2018/10



33 一般論文

Analysis of Cost Effectiveness by Material Type for CO2 Saving and Recycling Rates in Disassembly Parts Selection using Goal Programming
共著
Yuki Kinoshita, Tetsuo Yamada, Surendra M. Gupta, Aya Ishigaki, Masato Inoue
Journals of Advanced Mechanical Design Systems and Manufacturing
12/ 3, 1-18
2018/07

10.1299/jamdsm.2018jamdsm0080

34 一般論文

Modeling and Analysis of a Closed-Loop Supply Chain in Consideration of Extra Demand
共著
Ayako Okuda, Aya Ishigaki, Tetsuo Yamada, Surendra M. Gupta
International Journal of Automation Technology
12/ 4, 469-481
2018/07

10.20965/ijat.2018.p0469

35 一般論文

Customer Satisfaction and Timely Delivery: The Order Picking Scheduling Problem
共著
Shoya Yamada, Aya Ishigaki, Tetsuo Yamada
Innovation and Supply Chain Management
12/ 2, 21-26
2018/06

dx.doi.org/10.14327/iscm.12.21

36 一般論文

身体活動量計を用いた育児を行う父親の活動の判別法
共著
滝聖子, 藤原弘貴, 山田哲男, 髙野倉雅人, 佐藤翼
日本福祉工学会誌
20/ 1, 13-19
2018/05



37 一般論文

Inventory Management in a Manufacturing-Remanufacturing System with Cannibalization and Stochastic Returens
共著
Ayako Okuda, Aya Ishigaki, Tetsuo Yamada, Surendra M. Gupta
Scientific Journal of Logistics, LogForum
14/ 1, 113-125
2018/01

10.17270/J.LOG.2018.265

38 一般論文

Global Supply Chain Network Design and Asian Analysis with Material-Based Carbon Emissions and Tax
共著
Tomoyuki Urata, Tetsuo Yamada, Norihiro Itsubo, Masato Inoue
Computers and Industrial Engineering
113, 779-792
2017/11

10.1016/j.cie.2017.07.032

39 一般論文

高齢者デイケア施設における設備レイアウトの調査・分析法
共著
軽部幸起, 山田哲男, 高野倉雅人, 筧宗徳
日本設備管理学会誌
29/ 2, 97-109
2017/10



40 一般論文

ERPコンピエールの操作eラーニング教材の開発と実証授業
共著
徐風静, 山田哲男, 筧宗徳
日本設備管理学会誌
29/ 2, 110-122
2017/10



41 一般論文

Design of a Closed-Loop Supply Chain with Stochastic Product Returns
共著
Aya Ishigaki, Tetsuo Yamada, Surendra M. Gupta
International Journal of Automation Technology
11/ 4, 563-571
2017/07

10.20965/ijat.2017.p0563

42 一般論文

製品のアップグレード設計への適合性評価(ノートパソコンの設計問題への適用)
共著
柴田知世, 山田周歩, 山田哲男, 井上全人
日本機械学会論文集
83/ 851, 1-16
2017/06

10.1299/jsmedsd.2016.26.2102

43 一般論文

宅配業者の最終集荷時刻を考慮したオーダーピッキングスケジューリング作業の効率化
共著
山田祥也, 石垣綾, 山田哲男, 原田拓
日本設備管理学会誌
29/ 1, 1-12
2017/04



44 一般論文

乳幼児を持つ母親のライフログと作業の計測・分析法
共著
滝聖子, 角田陵輔, 高野倉雅人, 山田哲男
日本経営工学会論文誌
68/ 1, 47-55
2017/04

10.11221/jima.68.47

45 一般論文

Class Development of Management Information System Using System Operation E-learning By Compiere ERP
共著
Fengjing Xu, Tetsuo Yamada, Munenori Kakehi
Innovation and Supply Chain Management
11/ 1, 1-12
2017/03

10.14327/iscm.10.71

46 一般論文

リバース・サプライチェーンネットワークの設計と素材再生分析
共著
伊集院大将,山田哲男,木下雄貴,石垣綾,井上全人
日本設備管理学会誌
28/ 4, 147-159
2017/02



47 一般論文

Customer Satisfaction and Timely Delivery: The Order Picking Scheduling Problem
共著
Shoya Yamada, Aya Ishigaki, Tetsuo Yamada
Innovation and Supply Chain Management
(in press), ---
2016/12



48 一般論文

Upgradable Design for Sustainable Manufacturer Performance and Profitability and Reduction of Environmental Load
共著
Shuho Yamada, Tetsuo Yamada, Stefan Bracke, Masato Inoue
International Journal of Automation Technology
10/ 5, 690-698
2016/09

10.20965/ijat.2016.p0677

49 一般論文

作業者の棚での競合を考慮したオーダーピッキングスケジューリング問題のための近似解法
共著
山田祥也, 石垣綾, 山田哲男
日本設備管理学会誌
28/ 2, 30-39
2016/08



50 一般論文

介護老人福祉施設における介護業務の調査方法と作業改善に関する事例研究
共著
高野倉雅人, 三宅将文, 松井正之, 川上勝, 筧宗徳, 滝聖子, 山田哲男
日本設備管理学会誌
28/ 2, 86-93
2016/08



51 一般論文

Global Supply Chain Network Design for Lower Material Based CO2 Emissions and Costs between Developed and Emerging Countries
共著
Tomoyuki Urata, Tetsuo Yamada, Norihiro Itsubo, Masato Inoue
日本経営工学会論文誌
67/ 2E, 155-166
2016/07



52 一般論文

Disassembly Parts Selection and Analysis for Recycling Rate and Cost by Goal Programming
共著
Yuki Kinoshita, Tetsuo Yamada, Surendra M. Gupta, Aya Ishigak, Masato Inoue
Journals of Advanced Mechanical Design Systems and Manufacturing
10/ 3, 1-15
2016/07

10.1299/jamdsm.2016jamdsm 52

53 一般論文

Visualization of a Healthcare Service by Physical Activity of Workers’ Tasks at a Long-term Care Nursing Home
共著
Masato Takanokura, Tetsuo Yamada, Masaru Kawakami, Sseiko Taki, Munenori Kakehi
Innovation and Supply Chain Management
10/ 2, 71-77
2016/06

10.14327/iscm.10.71

54 一般論文

製品の違いを通じた組立・分解システムの比較考察によるボトルネック作業の特定とその改善方法
共著
木下雄貴, 山田哲男, 浦田智幸, 山田周歩, 井上全人
日本設備管理学会誌
27/ 4, 131-144
2016/02



55 一般論文

Disassembly System Modeling and Design with Parts Selection for Cost, Recycling, and CO2 Saving Rates using Multi Criteria Optimization
共著
Kento Igarashi, Tetsuo Yamada, Surendra M. Gupta, Masato Inoue, Norihiro Itsubo
Journal of Manufacturing Systems
38/ 41, 151-164
2016/01



56 一般論文

Material Based Low-Carbon and Economic Supplier Selection with Estimation of GHG Emissions and Affordable Cost Increment for Parts Production among Multiple Asian Countries
共著
Yuta Yoshizaki, Tetsuo Yamada, Norihiro Itsubo, Masato Inoue
日本経営工学会論文誌
66/ 4E, 435-442
2016/01



57 一般論文

リユース・サプライチェーンにおける回収量の時間変化が経済発注量に及ぼす影響
共著
村上隼也, 石垣綾, 山田哲男
日本設備管理学会誌
27/ 3, 100-108
2015/10



58 一般論文

需給と組立ラインの統合マネジメント・プランナーALMAP に関する事例研究
共著
山田哲男, 小川達也, 松井正之, 宇津木英明, 村田裕之
日本設備管理学会誌
27/ 3, 92-99
2015/10



59 一般論文

製品・生産設計間における組立および分解の作業とシステムの比較分析に関する事例研究
共著
浦田智幸, 山田哲男, 五十嵐健人, 井上全人, 木下雄貴
日本設備管理学会誌
27/ 3, 82-91
2015/10



60 一般論文

Modeling and Analysis of Sorting Traffic and Buffer Capacities for Disassembly Systems with Reverse Blocking
共著
Tetsuo Yamada, Yusuke Kume
Innovation and Supply Chain Management
9/ 3, 147-155
2015/09



61 一般論文

Measurement and Analysis Method for “Ikumen” Activities Including Childcare Tasks using a Triaxial Accelerometer
共著
Tetsuo Yamada, Shigehiro Sakurada, Masato Takanokura, Seiko Taki, Tasuku Sato
日本経営工学会論文誌
66/ 2E, 161-168
2015/07



62 一般論文

Selection of Supplier for End-of-Life Products based on the Optimum Profit, Quality Level, Material Sales Revenue and Disposal Weight
共著
Aditi D. Joshi, Surendra M. Gupta, Tetsuo Yamada
Innovation and Supply Chain Management
8/ 4, 134-139
2014/12

10.14327/iscm.8.134

63 一般論文

Material Based Low-Carbon and Economic Supplier Selection with Estimation of CO2 Emissions and Cost Using Life Cycle Inventory Database
共著
Yuta Yoshizaki, Tetsuo Yamada, Norihiro Itsubo, Masato Inoue
Innovation and Supply Chain Management
8/ 4, 159-170
2014/12

10.14327/iscm.8.159

64 一般論文

An Upgradable Product Design Method for Improving
Performance, CO2 Savings, and Production Cost Reduction: Vacuum Cleaner Case Study
共著
Masato Inoue, Shuho Yamada, Tetsuo Yamada, Stefan Bracke
International Journal of Supply Chain Management
3/ 4, 100-106
2014/12



65 一般論文

初期設計段階から性能と環境負荷削減を両立する3D-CADに基づくライフサイクル設計支援システム
共著
井上全人, 山田哲男, 石川晴雄
設計工学
49/ 10, 543-549
2014/10



66 一般論文

Optimal Disassembly System Design with Environmental and Economic Parts Selection for CO2 Saving Rate and Recycling Cost
共著
Kento Igarashi, Tetsuo Yamada, Norihiro Itsubo, Masato Inoue
International Journal of Supply Chain Management
3/ 3, 159-171
2014/09



67 一般論文

2-Stage Optimal Design and Analysis for Disassembly System with Environmental and Economic Parts Selection using the Recyclability Evaluation Method
共著
Kento Igarashi, Tetsuo Yamada, Masato Inoue
Industrial Engineering & Management Systems
13/ 1, 53-67
2014/03
1598-7248
10.7232/iems.2014.13.1.053

68 一般論文

部品構成と作業先行関係を考慮した素材仕分け分解システムの性能評価

山田哲男, 奥寺勇人, 伊坪徳宏, 井上全人
日本設備管理学会誌
25/ 4, 178-185
2014/01



69 一般論文

CDMF-RELSUS concept: Reliable Products are Sustainable Products - Influences on Product Design Manufacturing and Use Phase

Stefan Bracke, Jens Michalski, Masato Inoue, Tetsuo Yamada
International Journal of Sustainable Manufacturing
3/ 1, 57-73
2014/01



70 一般論文

SALPSによる混合ライン改善のための工場調査法と実証的分析

山田哲男, 石崎洸士,松井正之, 鈴木潤平
日本設備管理学会誌
25/ 3, 139-146
2013/10



71 一般論文

Disassembly System Design with Environmental and Economic Parts Selection using the Recyclability Evaluation Method
共著
Kento Igarashi, Tetsuo Yamada, Masato Inoue
日本経営工学会論文誌
64/ 2E, 293-302
2013/07



72 一般論文

Case Study of Generalized Material Flow Cost Accounting in Consideration of A Rate of Utilization

Masaaki Ohba, Masayuki Matsui, Nobuaki Ishii, Tetsuo Yamada
International Journal of Business and Economics
5/ 1, 49-62
2013/06



73 一般論文

Development of a Decision Support System for Selecting Transportation Mode Considering CO2 Emissions

Hiroyuki Ogawa, Tadayuki Masui, Tetsuo Yamada
日本経営工学会論文誌
62/ 3E, 117-124
2011/08



74 一般論文

Analysis of Effectiveness and Benefits of Collaboration Modes with Information- and Knowledge-sharing

Sang Won Yoon, Masayuki Matsui, Tetsuo Yamada, Shimon Y. Nof
Journal of Intelligent Manufacturing
22/ 1, 101-112
2011/02



75 一般論文

PLM Education in Production Design and Engineering by e-Learning

Munenori Kakehi, Tetsuo Yamada, Ichie Watanabe
International Journal of Production Economics
122/ 1, 479-484
2009/11



76 一般論文

A Performance Evaluation of Disassembly Systems with Reverse Blocking

Tetsuo Yamada, Naoyuki Mizuhara, Hisashi Yamamoto, Masayuki Matsui
Computers and Industrial Engineering
56/ 3, 1113-1125
2009/04



77 一般論文

エンジニアリング・プロセスにおける目的別BOMの構築

筧宗徳, 山田哲男, 八木英一郎, 渡邉一衛, 鈴木潤平, 玉木欽也
国際プロジェクト・プログラムマネジメント学会誌
3/ 1, 31-40
2008/12



78 一般論文

部品表の概念を用いた授業情報の構造化と授業設計

筧宗徳, 山田哲男, 渡邉一衛
日本e-Learning学会誌
8, 4-13
2008/05



79 一般論文

需要変化のもとでの効率的組立システムの比較研究

山田哲男, 掛札智美, 長友寛, 松井正之
日本経営工学会論文誌
59/ 1, 1-10
2008/04



80 一般論文

A Design Approach to Stochastic Mixed-Line with Look-Ahead

Kazuaki Abe, Tetsuo Yamada, Masayuki Matsui
日本ロジスティクスシステム学会誌
7/ 1, 33-46
2007/01



81 一般論文

Strategic Selection of Assembly Systems under Viable Demands

Tetsuo Yamada, Satomi Kakefuda, Masayuki Matsui
Assembly Automation
26/ 4, 335-342
2006/10



82 一般論文

「統合化PLM指向の事業創造プロセス 研究」TF21 事業創造戦略プロフェッショナル研究部会, “本年度の研究成果とまとめ”
共著
山田哲男
青山学院大学総合研究所, eラーニング人材育成研究センター, 研究叢書
1/ 1, 77-80
2006/03



83 一般論文

「統合化PLM指向の事業創造プロセス 研究」TF21 事業創造戦略プロフェッショナル研究部会, “PLMの研究課題”

渡邉一衛, 八木英一郎, 山田哲男, 筧宗徳
青山学院大学総合研究所, eラーニング人材育成研究センター, 研究叢書
1/ 1, 9-20
2006/03



84 一般論文

eラーニングによる「生産システム設計」に関する授業内容の開発

筧宗徳, 山田哲男, 高橋道哉, 渡辺一衛
電気学会論文誌C
125/ 4, 653-659
2005/04



85 一般論文

eラーニングによる協調型実習の設計法と「生産システム設計」授業への適用

筧宗徳, 山田哲男, 高橋道哉, 渡辺一衛
日本教育工学会論文誌
29/ 3, 349-358
2005/02



86 一般論文

A Design Problem of Assembly Line Systems using Genetic Algorithm under the BTO Environment

Kazuaki Abe, Tetsuo Yamada, Masayuki Matsui
電気学会論文誌C(電子・情報・システム部門誌)
124/ 10, 2006-2013
2004/10



87 一般論文

A Management Design Approach to Assembly Line Systems

T. Yamada, M. Matsui
International Journal of Production Economics
84/ 2, 193-204
2003/05



88 一般論文

「サイバーマニュファクチャリング」の「生産システム設計」

渡辺一衛, 高橋道哉, 山田哲男, 筧宗徳
青山学院大学総合研究所, 特別プロジェクト AMLⅡプロジェクト, ワーキングペーパー
1-38
2003/04



89 一般論文

eラーニングにおける「生産システム設計」の授業に関する研究・開発

筧宗徳, 山田哲男, 高橋道哉, 渡辺一衛
成蹊大学工学研究報告
40/ 1, 47-48
2003/01



90 一般論文

A Management Design Approach to a Simple Flexible Assembly System

N. Nakase,T. Yamada and M. Matsui
International Journal of Production Economics
76/ 3, 281-292
2002/04



91 一般論文

「サイバーマニュファクチャリング」教育方法の研究・開発―WP52サイバーコンカレントマネジメント開発“「生産システム設計」教育方法の研究・開発”

渡辺一衛, 高橋道哉, 山田哲男
青山学院大学総合研究所, 特別プロジェクト AMLⅡプロジェクト, 研究叢書
1/ 4, 39-52
2002/03



92 一般論文

2-Stage Design Method for Assembly Line Systems with Stoppers

T. Yamada and M. Matsui
日本経営工学会論文誌
51/ 6, 594-602
2001/02



93 一般論文

組立ラインシステム(ALS)の2段階設計法:統一アプローチ

山田哲男,松井正之
日本経営工学会論文誌
51/ 6, 538-549
2001/02



94 招待論文

アジア地域を含む低炭素型サプライチェーンの構築と会計の役割

國部克彦, 伊坪徳宏, 中嶌道靖, 山田哲男
会計, 招待論文
182/ 1, 82-97
2012/07



95 招待論文

持続可能なモノづくりに向けた循環型・低炭素型サプライチェーンの設計と課題

山田哲男
日本情報経営学会誌, 招待論文
33/ 1, 94-100
2012/06



96 国際会議プロシーディングス等

Life Cycle Option Selection of Disassembly Part for Recovery Rate and Cost Considering Reliability
共著
Shota Hasegawa, Tetsuo Yamada, Stefan Bracke
Proceedings of the 29th European Safety and Reliability Conference (ESREL), Hannover, Germany
2834-2841
2019/09

10.3850/978-981-11-2724-3 0291-cd

97 国際会議プロシーディングス等

Problem of Disassembly-To-Order System for Recycling Rate and Profit Using Linear Physical Programming
共著
Yuki Kinoshita, Tetsuo Yamada, Surendra M. Gupta
The 25th International Conference on Production Research (ICPR-25), Chicago, USA
-
2019/08



98 国際会議プロシーディングス等

Problem of Disassembly-To-Order System for Recycling Rate and Profit Using Linear Physical Programming
共著
Yuki Kinoshita, Tetsuo Yamada, Surendra M. Gupta
The 25th International Conference on Production Research (ICPR-25), Chicago, USA
-
2019/08



99 国際会議プロシーディングス等

Linear Physical Programming Iteration Method of Multi-Player Multi-Objective Decision Making in Supply Chain
共著
Tomoaki Yatsuka, Aya Ishigaki, Yuki Kinoshita, Tetsuo Yamada, Masato Inoue
The 25th International Conference on Production Research (ICPR-25), Chicago, USA
-
2019/08



100 国際会議プロシーディングス等

Rehabilitation Staff Scheduling in Senior Daytime Care Facility considering Physical and Mental Workloads
共著
Ryohei Matsumoto, Tetsuo Yamada, Yong-Hong Kuo, Masato Takanokura
International Symposium on Scheduling 2019 (ISS2019), Matsue, Japan
-, 150-155
2019/07



101 国際会議プロシーディングス等

An Innovation Analysis of Japanese Manufacturers Using Text Mining
共著
Yuta Kitano, Tetsuo Yamada, Kim Hua Tan
10th Annual European Decision Sciences Conference, Nottingham, UK
118-
2019/06



102 国際会議プロシーディングス等

Rehabilitation Staff Scheduling in Senior Daytime Care Facility Considering Difference in Staff Perception of Workloads

Ryohei Matsumoto, Tetsuo Yamada, Yong-Hong Kuo, Masato Takanokura
Fourth International Conference on Health Care Systems Engineering (HCSE2019), Montreal, Canada
-
2019/05



103 国際会議プロシーディングス等

Analysis of Reuse Fulfillment Process Using Cumulative Curve
共著
Jinya Anami, Yoshihiro Suzuki, Tetsuo Yamada
Northeast Decision Sciences Institute 2019 Annual Conference (NEDSI2019), Philadelphia, USA, Honorable Mention Undergraduate Student Poster Competition
-/ -
2019/04



104 国際会議プロシーディングス等

Integrated Design Concept for Reduction of CO2 Emission and Disposal Weight with Modularization Approach
共著
Yuki Kinoshita, Tetsuo Yamada
Northeast Decision Sciences Institute 2019 Annual Conference (NEDSI2019), Philadelphia, USA
ー/ ー, 847-851
2019/04



105 国際会議プロシーディングス等

Rehabilitation Staff Scheduling Problem Considering Mental Work Load in Elderly Daytime Care Facility
共著
Ryohei Matsumoto, Tetsuo Yamada, Masato Takanokura
The 19th Asia Pacific Industrial Engineering & Management Systems (APIEMS 2018), Hong Kong, China
-/ -, 6-
2018/12



106 国際会議プロシーディングス等

Life Cycle Option Selection of Disassembly Parts for Recovery Rate and Cost Considering Survival Rate
共著
Shota Hasegawa, Tetsuo Yamada, Stefan Bracke
The 19th Asia Pacific Industrial Engineering & Management Systems (APIEMS 2018), Hong Kong, China
-/ -, 6-
2018/12



107 国際会議プロシーディングス等

Issues and Challenges for Closed Loop Supply Chain Considering of Commodity Value and QCDE
共著
Aya Ishigaki, Tetsuo Yamada, Ryuta Takashima
INFORMS Annual Meeting 2018, Phoenix, USA, Sponsored Session
-/ -, 261-261
2018/11



108 国際会議プロシーディングス等

Effect of Robust Optimization Approach on Multi-Player Multi-Objective Production Planning Problem using Linear Physical Programming
共著
Tomoaki Yatsuka, Aya Ishigaki, Yuki Kinoshita, Tetsuo Yamada, Masato Inoue
16th International Logistics and Supply Chain Congress (LMSCM2018), Denizli, Turkey
ー/ ー, 137-143
2018/10



109 国際会議プロシーディングス等

Multi-Criteria Disassembly-To-Order System for Components and Materials with Limited Supply, Stochastic Yields and Quantity Discount
共著
Yuki Kinoshita, Tetsuo Yamada, Surendra M. Gupta
16th International Logistics and Supply Chain Congress (LMSCM2018), Denizli, Turkey
ー/ ー, 104-111
2018/10



110 国際会議プロシーディングス等

Effects of Carbon Trading System with Multi Criteria Decisions of Optimal Order Quantity and Best Supplier Selection
共著
Rena Kondo, Tetsuo Yamada
16th International Logistics and Supply Chain Congress (LMSCM2018), Denizli, Turkey
ー/ ー, 65-73
2018/10



111 国際会議プロシーディングス等

Evaluation of Asian Supplier and Disassembly Parts Selections for Carbon Emissions and Costs
共著
Hayate Irie, Rena Kondo, Shota Hasegawa, Tetsuo Yamada
16th International Logistics and Supply Chain Congress (LMSCM2018), Denizli, Turkey
ー/ ー, 57-64
2018/10



112 国際会議プロシーディングス等

Design Problems in Closed-Loop Supply Chain Networks with a Feedback Route for Recovered Materials
共著
Miho Ishii, Kengo Nakamura, Tetsuo Yamada
16th International Logistics and Supply Chain Congress (LMSCM2018), Denizli, Turkey
ー/ ー, 48-56
2018/10



113 国際会議プロシーディングス等

Solving the Disassembly-to-Order Problem for Components and Materials under Stochastic Yields, Limited Supply, and Quantity Discount using Linear Physical Programming
共著
Yuki Kinoshita, Tetsuo Yamada, Surendra M. Gupta
16th Global Conference on Sustainable Manufacturing (GCSM2018), Lexington, USA
ー/ ー
2018/10



114 国際会議プロシーディングス等

Modeling Global Supply Chain Network with Brexit and Material Customs Duty
共著
Kengo Nakamura, Tetsuo Yamada
Proceedings of The 14th International Conference on Industrial Management (ICIM2018), Hangzhou, China
-/ -, 237-243
2018/09



115 国際会議プロシーディングス等

An Inverse Matrix Modeling for Evaluating Assembly Line Cost with Busy Rate and Work-In-Process
共著
Yoshihiro Suzuki, Tetsuo Yamada
Proceedings of The 14th International Conference on Industrial Management (ICIM2018), Hangzhou, China
-/ -, 103-109
2018/09



116 国際会議プロシーディングス等

Optimal Production Strategy in a Manufacturing-Remanufacturing System with Cannibalization and Commodity Value
共著
Aya Ishigaki, Tetsuo Yamada
Proceedings of The 14th International Conference on Industrial Management (ICIM2018), Hangzhou, China
-/ -, 78-83
2018/09



117 国際会議プロシーディングス等

Proposal of a Modular Design Method Considering Supply Chain (Comprehensive Evaluation by Environment Load, Cost, Quality, and Lead Time)
共著
Shogo Miyajima, Shuho Yamada, Tetsuo Yamada, Masato Inoue
7th International Conference on Design and Concurrent Engineering (iDECON 2018), Kuching, Malaysia, Best Paper Award
-/ -
2018/09



118 国際会議プロシーディングス等

Framework for Accelerated Responsible Product Innovation
共著
Kim Hua Tan, Tetsuo Yamada
Proceedings of the International Conference on Creativity and Innovation 2018 (ICCI 2018), Osaka, Japan
-/ -, 477-484
2018/09



119 国際会議プロシーディングス等

Mathematical Modeling of Multi-player Multi-objective Decision Making by Linear Physical Programming
共著
Tomoaki Yatsuka, Aya Ishigaki, Hiromasa, Ijuin, Yuki Kinoshita, Tetsuo Yamada, Masato Inoue
3rd International Conference on Business Management of Technology (BMOT 2018), 7th IIAI International Congress on Advanced Applied Informatics (IIAI AAI 2018), Yonago, Japan, Outstanding Paper Award
-, 706-711
2018/07



120 国際会議プロシーディングス等

Comparison between Different Products by Disassembly System Design with Parts Selection for Cost, Recycling and CO2 Saving Rates using Multi-Criteria Optimization
共著
Kento Igarashi, Tetsuo Yamada, Norihiro Itsubo, Masato Inoue
3rd International Conference on Business Management of Technology (BMOT 2018), Yonago, Japan
-/ -, 694-699
2018/07



121 国際会議プロシーディングス等

Linear Physical Programming Approach for Environmentally Friendly and Economical Material Selection
共著
Yuki Kinoshita, Tetsuo Yamada, Surendra M. Gupta, Aya Ishigaki, Masato Inoue
IISE Annual Conference and Expo 2018, Orland, USA
-
2018/05



122 国際会議プロシーディングス等

Effects of Different Carbon Tax among Asian Countries on Low-carbon and Economic Supplier Selection
共著
Rena Kondo, Yuki Kinoshita, Tetsuo Yamada, Masato Inoue
Northeast Decision Sciences Institute 2018 Annual Conference (NEDSI2018), Providence, USA
-, 76-77
2018/04/14



123 国際会議プロシーディングス等

The Cluster Analysis Approach of Stress-Factors of Japanese Sojourners ELL and Their Parents in American School
共著
Michika Kato, Tetsuo Yamada, Aya Ishigaki
Northeast Decision Sciences Institute 2018 Annual Conference (NEDSI2018), Providence, USA
-, 188-
2018/04/13



124 国際会議プロシーディングス等

Material Selection for Cost, Disposal Weight and GHG Emissions by Linear Physical Programming
共著
Yuki Kinoshita, Tetsuo Yamada, Surendra M. Gupta, Aya Ishigaki, Masato Inoue
Northeast Decision Sciences Institute 2018 Annual Conference (NEDSI2018), Providence, USA
-, 115-
2018/04/13



125 国際会議プロシーディングス等

Design of Multi-player Multi-objective Decision Support System using a Linear Physical Programming Approach
共著
Tomoaki Yatsuka, Aya Ishigaki, Hiromasa, Ijuin, Yuki Kinoshita, Tetsuo Yamada, Masato Inoue
Northeast Decision Sciences Institute 2018 Annual Conference (NEDSI2018), Providence, USA, Best Poster Award
-, 9-10
2018/04/12



126 国際会議プロシーディングス等

Effect of Demand Changes for Assembly Line Cost by Matrix Modeling with Busy Rate and Work-In-Process
共著
Yoshihiro Suzuki, Tetsuo Yamada
Northeast Decision Sciences Institute 2018 Annual Conference (NEDSI2018), Providence, USA
-, 73-
2018/04/12



127 国際会議プロシーディングス等

Effects of Carbon Tax on Low-carbon and Economic Supplier Selection for Asian Assembly Product
共著
Rena Kondo, Yuki Kinoshita, Tetsuo Yamada, Norihiro Itsubo, Masato Inoue
Proceedings of EcoDesign 2017 International Symposium, Tainan, Taiwan
B5-1, 6 pages-
2017/11/30



128 国際会議プロシーディングス等

Disassembly Parts Selection for Material-based CO2 Saving Rate and Cost Considering Reuse
共著
Shota Hasegawa, Yuki Kinoshita, Tetsuo Yamada, Masato Inoue, Stefan Bracke
The 3rd International Conference on Remanufacturing, (ICoR2017), Linkoping, Sweden
175-188
2017/10/25



129 国際会議プロシーディングス等

Process Integration Concept for Waste Reduction among Manufacturing Planning, Modularization and Validation
共著
Tetsuo Yamada, Shota Hasegawa, Yuki Kinoshita, Shuho Yamada, Masato Inoue, Christoph Rosebrock, Stefan Bracke
15th Global Conference on Sustainable Manufacturing (GCSM2017), Haifa, Israel, Sept (2017)
-, ---
2017/09/26



130 国際会議プロシーディングス等

Proposal of A Component Upgradability Indicator from Comprehensive Perspectives (Case Study of Laptop Modules)
共著
Chise Shibata, Shuho Yamada, Tetsuo Yamada, Stefan Bracke, and Masato Inoue
The 4th International Conference on Design Engineering and Science (ICDES2017), Aachen, Germany
-/ -
2017/09/17



131 国際会議プロシーディングス等

Proposal of an Adaptability Evaluation Indicator for Component’s Life Cycle Options from Environmental, Economical, Functional and Reliable Perspectives
共著
Chise Shibata, Shuho Yamada, Tetsuo Yamada, Stefan Bracke, and Masato Inoue
International Conference on Design and Concurrent Engineering 2017 (iDECON 2017), Osaka, Japan
-/ -
2017/09/07



132 国際会議プロシーディングス等

Disassembly Parts Selection for Recovery Rate and Cost Considering Reuse
共著
Shota Hasegawa, Yuki Kinoshita, Tetsuo Yamada, Masato Inoue, Stefan Bracke
The 24th International Conference on Production Research (ICPR-24), Poznan, Poland, July (2017), Sepcial Session
-, ---
2017/08/01



133 国際会議プロシーディングス等

Inventory Management in a Manufacturing-Remanufacturing System with Stochastic Returns
共著
Ayako Okuda, Aya Ishigaki, Tetsuo Yamada, Surendra M. Gupta
The 24th International Conference on Production Research (ICPR-24), Poznan, Poland, July (2017), Sepcial Session
-, ---
2017/08/01



134 国際会議プロシーディングス等

Environmentally Friendly and Economical Decision Support Tool for Alternative Material Selection by Evaluating Assembly/Disassembly Effects
共著
Yuki Kinoshita, Tetsuo Yamada, Surendra M. Gupta, Aya Ishigaki, Masato Inoue
The 24th International Conference on Production Research (ICPR-24), Poznan, Poland, July (2017), Doctoral Workshop
-, ---
2017/07/29



135 国際会議プロシーディングス等

Linear Physical Programming Oriented Approach of Reverse Supply Chain Network Design for Costs and Recycling Rate
共著
Hiromasa Ijuin, Yuki Kinoshita, Tetsuo Yamada, Aya Ishigaki, Masato Inoue
2nd International Conference on Social Informatics and Systems Science (IIAI SISS 2017), 6th IIAI International Congress on Advanced Applied Informatics (IIAI AAI 2017), Hamamatsu, Japan, July (2017) , Organized Session
USB, 957-962
2017/07/10



136 国際会議プロシーディングス等

Effect of Material Prices for Global Supply Chain Network with Trans-Pacific Partnership
共著
Kengo Nakamura, Hiromasa Ijuin, Tetsuo Yamada, Aya Ishigaki, Masato Inoue
2nd International Conference on Social Informatics and Systems Science (IIAI SISS 2017), 6th IIAI International Congress on Advanced Applied Informatics (IIAI AAI 2017), Hamamatsu, Japan, July (2017) , Organized Session
USB, 951-956
2017/07/10



137 国際会議プロシーディングス等

Analysis of Facility Layout in Elderly Day Care Facility
共著
Koki Karube, Testuo Yamada, Munenori Kakehi, Masato Takanokura
Third International Conference on Health Care Systems Engineering (HCSE2017), Florence, Italy, May
-, ---
2017/05/30



138 国際会議プロシーディングス等

Modeling of Material-based Global Supply Chain Network with Asian Free Trade Agreements
共著
Kengo Nakamura, Hiromasa Ijuin, Tetsuo Yamada, Aya Ishigaki, Masato Inoue
Northeast Decision Sciences Institute 2017 Annual Conference (NEDSI2017), Springfield, USA
-, 921-926
2017/03/25



139 国際会議プロシーディングス等

Multi-objective Approach for Closed-loop Supply Chain with Stochastic Product Returns
共著
Aya Ishigaki, Tetsuo Yamada, Surendra M. Gupta
Northeast Decision Sciences Institute 2017 Annual Conference (NEDSI2017), Springfield, USA
-, 927-936
2017/03/24



140 国際会議プロシーディングス等

The Effective Support for Japanese Sojourner ELLs in American Schools
共著
Michika Kato, Monica Flores P., Tetsuo Yamada
Northeast Decision Sciences Institute 2017 Annual Conference (NEDSI2017), Springfield, USA
-, 360-365
2017/03/23



141 国際会議プロシーディングス等

Modeling of Alternative Material Selections for Environmetally-Friendly and Economical Assembly/Disassembly Evalutions
共著
Yuki Kinoshita, Tetsuo Yamada, Surendra M. Gupta, Aya Ishigaki, Masato Inoue
Northeast Decision Sciences Institute 2017 Annual Conference (NEDSI2017), Springfield, USA
-, 915-920
2017/03/23



142 国際会議プロシーディングス等

Cost Sharing Warranty Policices Analysis for Remanufactured Product in Reverse Supply Chain
共著
Ammar Y. Alqahtani, Surendra M. Gupta, Tetsuo Yamada
Northeast Decision Sciences Institute 2017 Annual Conference (NEDSI2017), Springfield, USA
-, 877-884
2017/03/23



143 国際会議プロシーディングス等

Analysis of Material Based GHG Emissions and Costs for Assembly Products Using Asian Lifecycle Inventory Databases: Cell Phone Case Study
共著
Rena Kondo, Yuki Kinoshita, Tetsuo Yamada
The 24th CIRP Conference on Life Cycle Engineering (LCE2017), Kamakura, Japan, March (2017)
-/ -
2017/03/10



144 国際会議プロシーディングス等

Pricing Decision Models for Remanufactured Short-Life Cycle Technology Products with Generation Consideration
共著
Liangchuan Zhou, Surendra M. Gupta, Yuki Kinoshita, Tetsuo Yamada
The 24th CIRP Conference on Life Cycle Engineering (LCE2017), Kamakura, Japan, March (2017)
-/ -
2017/03/08



145 国際会議プロシーディングス等

Combination Two-Dimensional Non-Renewable Warranty Policy Analysis for Remanufactured Products
共著
Ammar Y. Alqahtani, Surendra M. Gupta, Tetsuo Yamada
The 24th CIRP Conference on Life Cycle Engineering (LCE2017), Kamakura, Japan, March (2017)
-/ -
2017/03/08



146 国際会議プロシーディングス等

Class Implementation of System Operation e-Learning for Compiere ERP
共著
Fengjing Xu, Tetsuo Yamada, Munenori Kakehi
The 18th International Conference on Industrial Engineering (IJIE 2016), Seoul, Korea, Oct (2016)
-/ -
2016/10



147 国際会議プロシーディングス等

Environmental and Economic Disassembly Parts Selection Design for Recycling, CO2 Saving Rates and Cost by Goal Programming
共著
Yuki Kinoshita, Tetsuo Yamada, Surendra M. Gupta, Aya Ishigaki, Masato Inoue
The 18th International Conference on Industrial Engineering (IJIE 2016), Seoul, Korea, Oct (2016), Special Session
-/ -
2016/10



148 国際会議プロシーディングス等

Modeling of A Closed Loop Supply Chain with Stochastic Product Returns
共著
Ayako Okuda, Aya Ishigaki, Surendra M. Gupta, Tetsuo Yamada
The 18th International Conference on Industrial Engineering (IJIE 2016), Seoul, Korea, Oct (2016), Special Session
-/ -
2016/10



149 国際会議プロシーディングス等

Linear Physical Programming Approach for an Advanced-Repair-To-Order-Disassembly-To-Order System in Multiple Periods
共著
Aditi D. Joshi, Surendra M. Gupta, Aya Ishigaki, Tetsuo Yamada
EcoBalance 2016, Kyoto, Japan, Oct (2016)
-/ -
2016/10



150 国際会議プロシーディングス等

Reverse Suply Chain Flows with Matarial Recovery Constraint
共著
Hiromasa Ijuin, Tetsuo Yamada, Aya Ishigaki, Masato Inoue
EcoBalance 2016, Kyoto, Japan, Oct (2016)
-/ -
2016/10



151 国際会議プロシーディングス等

Decision Making within the Conceptual Design Phase of Eco-friendly Products
共著
Stefan Bracke, Shuho Yamada, Yuki Kinoshita, Masato Inoue, Tetsuo Yamada
14th Global Conference on Sustainable Manufacturing, (GCSM2016) Stellenbosch, South Africa, Oct (2016)
-
2016/10



152 国際会議プロシーディングス等

Analysis and Improcement Plans for Rehabilitation Schedule and Service Times: A Day Care Nursing Home
共著
Koki Karube, Tetsuo Yamada, Masato Takanokura, Munenori Kakehi, Seiko Taki
Proceedings of the 13th International Conference on Industrial Management (ICIM2016), Hiroshima, Japan
382-390
2016/09



153 国際会議プロシーディングス等

Integration of Closed-Loop and Law-Carbon Supply Chains: Modeling, Satisficing and Potential Biotechnology for Sustainability
共著
Tetsuo Yamada, Surendra M. Gupta, Aya Ishigaki
Global Biotchnology Congress 2016, Boston, USA, Aug (2016)
-/ -
2016/08



154 国際会議プロシーディングス等

Multi-objective Analysis for Closed-loop Supply Chain of Environmental Consideration Type Product
共著
Aya Ishigaki, Tetsuo Yamada, Surendra M. Gupta
Global Biotchnology Congress 2016, Boston, USA, Aug (2016)
-/ -
2016/08



155 国際会議プロシーディングス等

Combination Warranty Policy Analysis for Remanufactured Product
共著
Ammar Y. Alqahtani, Surendra M. Gupta, Aya Ishigaki, Tetsuo Yamada
Global Biotchnology Congress 2016, Boston, USA, Aug (2016)
-/ -
2016/08



156 国際会議プロシーディングス等

A Goal Programming Approach for an Advanced-Remanufacturing-To-Order-Disassembly-To-Order System in Multiple Periods
共著
Aditi D. Joshi, Surendra M. Gupta, Aya Ishigaki, Tetsuo Yamada
Global Biotchnology Congress 2016, Boston, USA, Aug (2016)
-/ -
2016/08



157 国際会議プロシーディングス等

Material Analysis of Disassembly Parts Selection for CO2 Saving Rate and Recycling Costs by Goal Programming
共著
Yuki Kinoshita, Tetsuo Yamada, Surendra M. Gupta, Aya Ishigaki
Global Biotchnology Congress 2016, Boston, USA, Aug (2016)
-/ -
2016/08



158 国際会議プロシーディングス等

Scheduling Problem of Order Picking Operations Considering the Last Parcel Pickup Time
共著
Shoya Yamada, Aya Ishigaki, Tetsuo Yamada, Taku Harada
Northeast Decision Sciences Institute 2016 Annual Conference (NEDSI2016), Alexandria, USA
-
2016/04/02



159 国際会議プロシーディングス等

Simulation analysis of Closed Loop Supply Chain with Stochastic Product Returns
共著
Aya Ishigaki, Tetsuo Yamada, Surendra M. Gupta
Northeast Decision Sciences Institute 2016 Annual Conference (NEDSI2016), Alexandria, USA
-
2016/04/01



160 国際会議プロシーディングス等

Study on Life Log of Female Parent during Child Care in Japan
共著
Seiko Taki, Ryosuke Kakuta, Masato Takanokura, Tetsuo Yamada
Industrial Engineering and Operations Management 2016, Kuala Lumpur, Malaysia
-, 1402-1402
2016/03



161 国際会議プロシーディングス等

Disassembly Parts Selection for Environmental Loads and Cost by Goal Programming
共著
Yuki Kinoshita, Tetsuo Yamada, Surendra M. Gupta, Aya Ishigaki, Norihiro Itsubo, Masato Inoue
Northeast Decision Sciences Institute 2016 Annual Conference (NEDSI2016), Alexandria, USA
-
2016/03/31



162 国際会議プロシーディングス等

Modeling and Analysis of Reverse Supply Chain Network with End-of-Life Product Status for Costs and Recycling Rate
共著
Hiromasa Ijuin, Tetsuo Yamada, Aya Ishigaki, Masato Inoue
Northeast Decision Sciences Institute 2016 Annual Conference (NEDSI2016), Alexandria, USA
-
2016/03/31



163 国際会議プロシーディングス等

Operation Process Analysis and KAIZEN of Healthcare Activities on Nursing Homes in Japan
共著
Masafumi Miyake, Masato Takanokura, Masayuki Matsui, Masaru Kawakami, Munenori Kakehi, Seiko Taki, Tetsuo Yamada, Keio Ishiguro
The 16th Asia Pacific Industrial Engineering & Management Systems Conference 2016 (APIEMS 2016), Ho Chi Minh City, Vietnam
-
2015/12



164 国際会議プロシーディングス等

,
共著
Shuho Yamada, Tetsuo Yamada, Stefan Bracke and Masato Inoue
Proceedings of EcoDesign 2015 International Symposium, Tokyo, Japan
-, 392-396
2015/12/02



165 国際会議プロシーディングス等

Inventory Management and Production Planning with Imperfect Remanufacturing Products of Closed-loop Supply Chains
共著
Aya Ishigaki, Seiichi Yasui, Tetsuo Yamada
The Decision Sciences Institute (DSI), The 46th Annual Meeting, Seattle, USA
111-111
2015/11



166 国際会議プロシーディングス等

Quantification of Healthcare Works by Physical Activity at a Nursing Home for Long-term Care
共著
Masato Takanokura, Masafumi Miyake, Masaru Kawakami, Seiko Taki, Tetsuo Yamada and Munenori Kakehi
Proceedings of The 2nd East Asia Workshop on Industrial Engineering, Seoul, Korea
USB, 74-82
2015/11



167 国際会議プロシーディングス等

Analysis of Environmental and Economic Disassembly Parts Selection by Goal Programming
共著
Yuki Kinoshita, Tetsuo Yamada, Surendra M. Gupta, Aya Ishigaki, Masato Inoue
13th Global Conference on Sustainable Manufacturing (GCSM), CIRP, Ho Chi Minh City / Binh Duong, Vietnam
-
2015/09/17



168 国際会議プロシーディングス等

An Asian Global Supply Chain Network Design for Lower Material Based CO2 Emissions and Costs
共著
Tomoyuki Urata, Tetsuo Yamada, Norihiro Itsubo, Masato Inoue
The 23rd International Conference on Production Research (ICPR-23), Manila, Philippine, Aug (2015)
CD-ROM
2015/08



169 国際会議プロシーディングス等

Economic Lot Scheduling Problem with Same Production Line for Manufacturing and Remanufacturing
共著
Aya Ishigaki, Tetsuo Yamada
International Conference on Remanufacturing (ICoR)
228-234
2015/06



170 国際会議プロシーディングス等

Disassembly System Design with Environmental and Economic Parts Selection Using Goal Programming
共著
Yuki Kinoshita, Tetsuo Yamada, Surendra M. Gupta, Aya Ishigaki, Masato Inoue
International Conference on Remanufacturing (ICoR)
-, 219-226
2015/06



171 国際会議プロシーディングス等

Systems Approach for Preventing Falls in Hospitals and Nursing Homes using Sensing Devices Surrounding the Patient’s Bed
共著
Masato Takanokura, Masafumi Miyake, Masaru Kawakami, Tetsuo Yamada, Seiko Taki, Munenori Kakehi
Second International Conference on Health Care Systems Engineering (HCSE), Lyon, France, May (2015)
USB
2015/05



172 国際会議プロシーディングス等

Issues with Healthcare Delivery Systems in Japan: Insurance, Services, and Facilities for Elderly Care
共著
Masato Takanokura, Tetsuo Yamada, Masaru Kawakami, Keio Ishiguro, Tomokazu Muto, Seiko Taki, Munenori Kakehi
Northeast Decision Sciences Institute 2015 Annual Conference (NEDSI2015)
-
2015/03



173 国際会議プロシーディングス等

A Lot-sizing Problem with Time Variation Impact in Closed-loop Supply Chains
共著
Aya Ishigaki, Tetsuo Yamada
Northeast Decision Sciences Institute 2015 Annual Conference (NEDSI2015)
-
2015/03



174 国際会議プロシーディングス等

A Multi-objective Problem for Product and System Design in Assembly and Disassembly
共著
Yuki Kinoshita, Tetsuo Yamada, Surendra M. Gupta, Masato Inoue
Northeast Decision Sciences Institute 2015 Annual Conference (NEDSI2015)
-
2015/03



175 国際会議プロシーディングス等

An Environmental Conscious Product Design Method for Sustainability of the Product's Value
共著
Shuho Yamada, Tetsuo Yamada, Katsuyuki Nakano, Stefan Bracke, Masato Inoue
Going Green - CARE INNOVATION 2014
-
2014/11



176 国際会議プロシーディングス等

Real Time Measurement and Analysis of Iku-men Activities for Childcare Service Innovation and Challenge
共著
Tetsuo Yamada, Shigehiro Sakurada, Masato Takanokura, Seiko Taki, Tasuku Sato
1st East Asia Workshop on Industrial Engineering
USB
2014/11



177 国際会議プロシーディングス等

Low-carbon and Economic Supplier Selection among Multiple Asian Countries with Estimation of GHG Emissions and Cost for Parts Production
共著
Yuta Yoshizaki, Tetsuo Yamada, Norihiro Itsubo, Masato Inoue
1st East Asia Workshop on Industrial Engineering
USB
2014/11



178 国際会議プロシーディングス等

Selection of Products for Remanufacturing Based on the Designs of End of Life Products
共著
Aditi D. Joshi, Surendra M. Gupta, Tetsuo Yamada
EcoBalance 2014, The 11th International Conference on EcoBalance
28B4-3
2014/10/27



179 国際会議プロシーディングス等

A Lot Size-Based Collaborative Demand-to-Supply Management System for Make-to-Order Environment
共著
Nobuaki Ishii, Ko Sakashita, Tetsuo Yamada, Masaaki Ohba, Masayuki Matsui
Proceedings of the Asia Pacific Industrial Engineering & Management Systems Conference 2014
-
2014/10/12



180 国際会議プロシーディングス等

Low-Carbon and Economic Supplier Selection Using Life Cycle Inventory Database by Asian International Input-Output Tables
共著
Tetsuo Yamada, Yuta Yoshizaki, Norihiro Itsubo, Masato Inoue
12th Global Conference on Sustainable Manufacturing (GCSM) , CIRP
-
2014/09



181 国際会議プロシーディングス等

Modeling and Balancing for Costs and CO2 Emissions in Global Supply Chain Network among Asian Countries
共著
Tomoyuki Urata, Tetsuo Yamada, Norihiro Itsubo, Masato Inoue
12th Global Conference on Sustainable Manufacturing (GCSM) , CIRP
-
2014/09



182 国際会議プロシーディングス等

Multi Criteria Simulation Model for Lead Times, Costs and CO2 Emissions in Low-Carbon Supply Chain Network between Malaysia, China and Japan
共著
Tetsu Kawasaki, Tetsuo Yamada, Norihiro Itsubo, Masato Inoue
12th Global Conference on Sustainable Manufacturing (GCSM) , CIRP
-
2014/09



183 国際会議プロシーディングス等

An Upgrade Product Design Method for Satisfying Performance Criteria, Environment Load and Cost
共著
Shuho Yamada, Tetsuo Yamada, Stefan Bracke, Masato Inoue
3rd International Conference on Design and Concurrent Engineering (iDECON 2014)
-
2014/09



184 国際会議プロシーディングス等

Upgradable Design for Reduction of Production Cost and CO2 Emission - Case Study of a Laptop Computer
共著
Shuho Yamada, Tetsuo Yamada, Stefan Bracke, Masato Inoue
The 3rd International Conference on Design Engineering and Science (ICDES2014), Pilsen, Czech
-
2014/08



185 国際会議プロシーディングス等

Identification of High-Intensity Physical Activities during Child Rearing Using a Triaxial Accelerometer
共著
, Kraków, Poland, July (2014)
5th International Conference on Applied Human Factors and Ergonomics (AHFE2014), Kraków, Poland
-
2014/07



186 国際会議プロシーディングス等

Upgradable Design for Various User Demands
共著
Masato Inoue, Shuho Yamada, Tetsuo Yamada, Stefan Bracke
11th International Conference on Product Lifecycle Management (PLM14)
USB
2014/07/07



187 国際会議プロシーディングス等

CDMF-RELSUS Concept: Reliable and Sustainable Products -Influences on Design, Manufacturing, Layout Integration and Use Phase
共著
Stefan Bracke, Masato Inoue, Berna Ulutas, Tetsuo Yamada
21st CIRP Conference on Life Cycle Engineering, Procedia CIRP 15, Trondheim, Norway
-, 8-13
2014/06



188 国際会議プロシーディングス等

Use of Multi Criteria Decision Making to Simultaneously Address Disassembly Cost, Recycling and CO2 Saving Rates

Kento Igarashi, Tetsuo Yamada, Surendra M. Gupta, Masato Inoue, Norihiro Itsubo
Northeast Decision Sciences Institute, 2014 Annual Conference (NEDSI2014)
-
2014/03



189 国際会議プロシーディングス等

A Study on Childcare Service Innovation Using Measurement of Real Time Life Log

Tetsuo Yamada, Shigehiro Sakurada, Masato Takanokura, Seiko Taki, Tasuku Sato
The Decision Sciences Institute (DSI), the 44th Annual Meeting, Baltimore, USA
120-
2013/11



190 国際会議プロシーディングス等

Model and Design of Asian Supply Chain Network Considering CO2 Emissions

Tomoyuki Urata, Tetsuo Yamada, Norihiro Itsubo, Masato Inoue
The Decision Sciences Institute (DSI), the 44th Annual Meeting, Baltimore, USA
68-
2013/11



191 国際会議プロシーディングス等

Variation Effect of Lead Time in Designing Low Carbon Supply Chain Network including Asia
共著
Tetsu Kawasaki, Tetsuo Yamada, Norihiro Itsubo, Masato Inoue
The Decision Sciences Institute (DSI), the 44th Annual Meeting, Baltimore, USA
32-
2013/11



192 国際会議プロシーディングス等

Multi Criteria Optimization Model for Disassembly Cost, Recycling Rate and Carbon Emissions

Kento Igarashi, Tetsuo Yamada, Masato Inoue, Norihiro Itsubo, Surendra M. Gupta
The Decision Sciences Institute (DSI), the 44th Annual Meeting, Baltimore, USA
21-
2013/11



193 国際会議プロシーディングス等

Environmental and Economic Buffer Allocation Problem in Sorting Disassembly System

Tetsuo Yamada, Norihiro Itsubo, Yuto Okudera, Masato Inoue
2013 INFORMS Annual Meeting, Minneapolis, USA
407-
2013/10



194 国際会議プロシーディングス等

CDMF-RELSUS concept: Reliable products are sustainable products -Automotive case study “clutch”

Jens Michalski, Tetsuo Yamada, Masato Inoue, Stefan Bracke
GCSM Proceedings: 11th Global Conference on Sustainable Manufacturing, CIRP
CDROM, 445-449
2013/09



195 国際会議プロシーディングス等

Simulation Analysis of Supply Chain Network with Stochastic Lead Time

Tetsu Kawasaki, Tetsuo Yamada
Proceedings of International Symposium on Scheduling 2013 (ISS2013)
196-201
2013/07



196 国際会議プロシーディングス等

An Optimal Design for Global Supply Chain Network Considering CO2 Emissions of Part Production

Tomoyuki Urata, Tetsuo Yamada, Norihiro Itsubo, Masato Inoue
Proceedings of International Symposium on Scheduling 2013 (ISS2013)
190-195
2013/07



197 国際会議プロシーディングス等

Low-Carbon Supplier Selection Using Life Cycle Inventory Database in China and Japan

Yuta Yoshizaki, Tetsuo Yamada, Norihiro Itsubo, Masato Inoue
Proceedings of International Symposium on Scheduling 2013 (ISS2013)
184-189
2013/07



198 国際会議プロシーディングス等

Disassembly System Design with Optimal Environmental and Economic Parts Selection Using Life Cycle Inventory Database by Input-Output Tables

Tetsuo Yamada, Kento Igarashi, Norihiro Itsubo, Masato Inoue
Northeast Decision Sciences Institute, 2013 Annual Conference (NEDSI2013)
CDROM, 589-599
2013/04



199 国際会議プロシーディングス等

Case Study of Generalized Material Flow Cost Accounting in Consideration of A Rate of Utilization

Masaaki Ohba, Masayuki Matsui, Nobuaki. Ishii, Tetsuo Yamada
The International Symposium on Production and Supply Chain Management (ISPSCM)
CDROM
2012/12



200 国際会議プロシーディングス等

Optimal Design of Disassembly System with Environmental and Economic Parts Selection using Recyclability Evaluation Method

Kento Igarashi, Tetsuo Yamada, Masato Inoue
Proceedings of The 13th Asia Pacific Industrial Engineering and Management Systems Conference (APIEMS 2012)
CDROM, 589-599
2012/12



201 国際会議プロシーディングス等

Disassembly System Design with Environmental and Economic Parts Selection using Life Cycle Inventory Database by Input-Output Tables

Tetsuo Yamada, Yusuke Suzuki, Tadayuki Masui, Norihiro Itsubo, Masato Inoue
Proceedings: 10th Global Conference on Sustainable Manufacturing, Sustainable Product Development and Life Cycle Engineering, CIRP
CDROM, 321-326
2012/11



202 国際会議プロシーディングス等

Queueing Modeling of Material Sorting Disassembly System

Tetsuo Yamada, Rizka Aisha Rahmi Hariadi, Yuji Matsuda
Proceedings of The International Workshop on Modern Science and Technology 2012 (IWMST 2012)
255-260
2012/08



203 国際会議プロシーディングス等

Disassembly System Design with Environmental and Economic Parts Selection using Recyclability Evaluation Method

Kento Igarashi, Tetsuo Yamada, Masato Inoue
Proceedings of the International Symposium on Reliability Engineering and Risk Management (ISRERM2012)
3 on CDROM, 177-182
2012/08



204 国際会議プロシーディングス等

Queueing Analysis of Disassembly Systems with Reverse Blocking in Consideration of Sorting Traffic and Buffer Capacities

Tetsuo Yamada, Yusuke Kume, Hisashi Yamamoto
Proceedings of the IIE Asian Conference 2012
e-Proceedings
2012/06



205 国際会議プロシーディングス等

An Overview and Challenges in Designing Supply Chains for Sustainability

Tetsuo Yamada
International Symposium on Environmental Accounting and LCA for Greening the Supply Chain in Asia
10-
2011/12



206 国際会議プロシーディングス等

Information Sharing and Utilization for Environmental Loads in Disassembly System with PLM

Tetsuo Yamada, Kazuki Sunanaga
Proceedings: 9th Global Conference on Sustainable Manufacturing, Sustainable Product Development and Life Cycle Engineering, CIRP
CDROM, 264-269
2011/09



207 国際会議プロシーディングス等

Sorting Process Location Problem in Disassembly System Configuration

Yuto Okudera, Tetsuo Yamada, Tadayuki Masui, Norihiro Itsubo
21th International Conference on Production Research (ICPR 21), Conference Proceedings
CDROM
2011/08



208 国際会議プロシーディングス等

Model and Design of Recycling Disassembly Systems with Material Recovery Values

Tetsuo Yamada, Jun Kameda, Kento Igarashi
International Conference on Remanufacturing (ICoR 2011), Conference Proceedings
211-217
2011/07



209 国際会議プロシーディングス等

Modeling and Design for Reuse Inverse Manufacturing Systems with Product Recovery Values

Tetsuo Yamada, Naomi Ohta
The 8th Global Conference on Sustainable Manufacturing, Sustainable Product Development and Life Cycle Engineering, CIRP
-
2010/11



210 国際会議プロシーディングス等

An Analysis of Disassembly Systems with Reverse Blocking

Tetsuo Yamada, Naoyuki Mizuhara, Hisashi Yamamoto, Masayuki Matsui
Abstracts of ISCM 2006
18-
2006/11



211 国際会議プロシーディングス等

A Framework for Environment-Conscious and Enduser-Oriented PLM

Tetsuo Yamada, Masato Inoue, Masahiro Ishii, Haruo Ishikawa,
Kouichi Morishige, Masayuki Takata, Shunji Umetani, Kenji Yura
Sustainable Manufacturing, IV Global Conference on Sustainable Product Development and Life Cycle Engineering
85-
2006/10



212 国際会議プロシーディングス等

Strategic Selection of Economic Assembly Systems under Viable Demands

Tetsuo Yamada, Satomi Kakefuda, Masayuki Matsui
INFORMS Hong Kong 2006
116-
2006/06



213 国際会議プロシーディングス等

Key issues on implementing cooperative mobile robot technologies for port automation tasks

Shivendra Kumar, Ljubo Vlacic, Tetsuo Yamada, Masayuki Matsui, Aiguo Ming
CIRAS 2005
1058-
2005/12



214 国際会議プロシーディングス等

A Design Study of Stochastic Mixed Lines with Control Factors

Tetsuo Yamada, Kazuaki Abe, Masayuki Matsui
Abstracts of ICPR-18
154-
2005/08



215 国際会議プロシーディングス等

Class Content Design about Collaborative Learning for
'Production System Design' using the e-Learning

Munenori Kakehi, Tetsuo Yamada, Ichie Watanabe
Abstracts of ICPR-18
93-
2005/08



216 国際会議プロシーディングス等

A Queuing Model of Disassembly Systems with New Blocking

Tetsuo Yamada, Hisashi Yamamoto, Masayuki Matsui
Proceedings of PCMM' 2004
778-785
2004/12



217 国際会議プロシーディングス等

A Design Problem of Assembly Line Systems using Genetic Algorithm under the BTO Environment

Kazuaki Abe, Tetsuo Yamada, Masayuki Matsui
Proceedings of 2003 Asia Pacific Symposium on Intelligent and Evolutionary Systems: Technology and Applications
176-177
2003/11



218 国際会議プロシーディングス等

A Cooperation/Collaboration Logic by Sharing Information in an ERP Model

Jun Yamato, Tetsuo Yamada, Masayuki Matsui, Shimon Y. Nof
Final Program of ICPR-17
27-
2003/08



219 国際会議プロシーディングス等

Research and Development about the Lesson of "Production System Design" using the e-Learning

Munenori Kakehi, Tetsuo Yamada, Michiya Takahashi, Ichie Watanabe
Final Program of ICPR-17
17-
2003/08



220 国際会議プロシーディングス等

Concept of Management Scheduler and a Software Development

Masayuki Matsui, Tetsuo Yamada, Yasuyuki Nishioka
Proceedings of International Symposium on Scheduling 2002, Hamamatsu, Japan
25-28
2002/06



221 国際会議プロシーディングス等

An ARIS Approach for 2-Center Model of Sales and Production

T. Yamada and M. Matsui
PRISM Symposium & Reunion on Integration,Networking,and Next Decade,Purdue University,USA
10-
2001/08



222 国際会議プロシーディングス等

A Unified Approach to Stochastic Assembly Line Systems : Simultaneous Decision of Cycle Time and Buffers

T. Yamada and M. Matsui
Summaries of ICPR '01,Prague,L4.4
89-
2001/08



223 国際会議プロシーディングス等

A Management Design Approach to Assembly Line Systems

T. Yamada and M. Matsui
Proceedings of PCM 2000,Detroit, USA
878-883
2000/09



224 国際会議プロシーディングス等

A 2-Stage Design Problem of Assembly Line Systems with Stoppers

T. Yamada and M. Matsui
Proceedings of APIEM'99, Kanazawa, Japan
385-388
1999/10



225 国際会議プロシーディングス等

2-Stage Design Method for Assembly Line Systems : A Unified Approach

T. Yamada and M. Matsui
Final Program of IFORS'99, Beijing, China
150-
1999/08



226 解説

持続可能なモノづくりのための循環型・低炭素型サプライチェーンの統合へ向けて

山田哲男
経営システム
22/ 3, 135-140
2012/10



227 論説

持続可能なモノづくりのための循環型・低炭素型サプライチェーン

山田哲男
メカトップ関東
116/ 1130, 5-
2013/01



228 エッセー

ボストン座談会 Part 2: 米国のサプライチェーンとサービスの実際 - ノースイースタン大学機械・経営工学科での滞在研究と米国生活(4)-
共著
山田哲男, 加藤美慈, 山際美佳, 石垣綾
経営システム
27/ 3, 178-184
2017/10



229 エッセー

ボストン座談会 米国のワークライフバランスとヘルスケアの実際 - ノースイースタン大学機械・経営工学科での滞在研究と米国生活(3)-
共著
山田哲男, 加藤美慈, 山際美佳, 石垣綾
経営システム
26/ 2, 109-117
2016/07



230 エッセー

ボストンでの米国家族生活と多様性を持つ社会システム - ノースイースタン大学機械・経営工学科での滞在研究と米国生活(2)-
単著
山田哲男
経営システム
25/ 2, 114-122
2015/07



231 エッセー

大学街ボストンでただ一つの経営工学科がある米国ノースイースタン大学 - ノースイースタン大学機械・経営工学科での滞在研究と米国生活
単著
山田哲男
経営システム
24/ 4, 229-235
2015/01