日本語
The University of Electro-Communications 
Graduate School of Informatics and Engineering, School of Informatics and Engineering 
Department of Mechanical and Intelligent Systems Engineering, Cluster III (Fundamental Science and Engineering) 

Assistant Professor 
Shohei KAJIKAWA 

Career
日本学術振興会  特別研究員(DC2)  2014/04/01-2015/09/30 
電気通信大学  大学院情報理工学研究科 知能機械工学専攻  助教  2015/10/01-Present 

Academic background
兵庫県立兵庫高等学校  2007/03  Graduated 
Kyoto Institute of Technology  工芸科学部  機械システム工学課程  2011/03/25  Graduated 
Kyoto Institute of Technology  工芸科学研究科  機械システム工学専攻  Master's program  2013/03/25  Completed 
Kyoto Institute of Technology  工芸科学研究科  設計工学専攻  Doctoral program  2015/09/24  Completed 

Academic degrees
学士(工学)  Kyoto Institute of Technology  2011/03/25 
Master of Engineering  Kyoto Institute of Technology  2013/03/25 
Doctor of Engineering  Kyoto Institute of Technology  2015/09/24 

Classes responsible within the university
2017  加工学および演習  Spring semester  Undergraduate, daytime 
2017  メカノデザイン  Fall semester  Undergraduate, daytime 
2017  専門実験B  Fall semester  Undergraduate, mainly nighttime 
View details...

Classes responsible in other universities
2016  機械工学実験第一  首都大学東京 
2017  生産加工概論  明星大学 
View details...

Current research areas
Production engineering/ Processing studies 

Current research subjects
木質系材料の成形加工に関する研究  2015/10/01-Present 
金属材料の塑性加工に関する研究(板成形,管の抽伸)  2015/10-Present 

Published books
Book  引抜き―棒線から管までのすべて―  浅川基男,齋藤賢一,吉田一也,相沢隆,上井清史,岩本隆,増田智一,三村正直,奥井達也,高杉直樹,土屋昭則,久保木孝,中野元裕,梶川翔平  コロナ社  314-335  2017/05/26  978-4-339-04372-3 
View details...

Published papers
Paper  Yes  Proposal of a numerical model using the finite element analysis of pilger rolling for improvement of computation precision and efficiency  Joint  Tsuyoshi Muraoka, Takashi Kuboki, Shohei Kajikawa, Daisaku Yanaga, Kouichi Kuroda  Procedia Engineering  207, 2364-2369  2017/11/15 
Paper  Yes  Two-step forming for improvement of forming limit in rotary nosing with relieved die for reduction of tube tip  Joint  Wataru Oba, Yusuke Imaizumi, Shohei Kajikawa, Takashi Kuboki  Procedia Engineering  207, 1743-1748  2017/11/15 
Paper  Yes  Molding of wood powder with a natural binder  Joint  Shohei Kajikawa, Masaya Horikoshi, Soichi Tanaka, Kenji Umemura, Kozo Kanayama  Procedia Engineering  207, 113-118  2017/11/15 
Paper  Yes  Upset of bent wire/tube for fabrication of in-plane bent sheet metals with extremely large breadth and small bending radius  Joint  Takashi Kuboki, Tsuyoshi Muraoka, Tsubasa Tsubouchi, Shohei Kajikawa  CIRP Annals - Manufacturing Technology  66/ 1, 277-280  2017/08/04  10.1016/j.cirp.2017.04.120 
Paper  Yes  Forming method and characteristics of coiled spring in small coil diameter and with high rectangular ratio in winding wire cross section  Joint  Tsuyoshi Muraoka, Tsubasa Tsubouchi, Takashi Kuboki, Shohei Kajikawa  International Journal of Advanced Manufacturing Technology  91, 2635-2643  2017/06/23  10.1007/s00170-016-9968-3 
View details...

Research presentations
Oral presentation for an academic conference  三次元形状部品の成形加工を目的としたスクロース・クエン酸混合物添加木粉の熱流動特性の評価  第67回日本木材学会大会  No  堀越将矢,梶川翔平,田中聡一,梅村研二,金山公三  2017/03/17 
Oral presentation for an academic conference  スピンナー矯正加工において矯正工具の押込み量が線材の真直度に及ぼす影響  日本機械学会関東学生会第56回学生員卒業研究発表講演会  No  楠田 大介, 久保木 孝, 梶川 翔平, 松村 弘道, 小野 哲士, 清宮 光  2017/03/16 
Oral presentation for an academic conference  外面しごき加工による円筒内面への凹部転写成形  日本機械学会関東学生会第56回学生員卒業研究発表講演会  No  小沢 竜徳, 久保木 孝, 梶川 翔平, 山内 章, 郡司 章, 大西 堅幸  2017/03/16 
Oral presentation for an academic conference  Effect of shoulder shape of punch and die on formability of sheet metal in combining process of drawing and ironing by compressive force  The Proc. of the 67th Japanese Joint Conference for the Technology of Plasticity  No  Shohei Kajikawa, Takashi Kuboki, Takashi Iizuka  2016/10 
Oral presentation for an academic conference  薄肉銅管の回転引き曲げ加工による小径曲げにおいてマンドレル形状が成形性に及ぼす影響  The Proc. of the 67th Japanese Joint Conference for the Technology of Plasticity  No  木村 圭太,久保木 孝,梶川 翔平,渡辺 雅人,崩岡 久敏  2016/10 
View details...

Grants-in-aid for scientific research
素材の流動特性活性化による木質系材料のみを用いた成形技術の開発  Young scientists (B)  2016/04/01-2019/03/31 
View details...

Past records of joint or funded research
インドネシア産ウリン材の効果的な新規接合技術の開発による高強度長尺部材 の製造  2017-2017  Joint research  Domestic joint research 
Development of forming method using wood powder with natural adhesive for fabrication of product with three dimensional shape  2016-2016  Joint research  Domestic joint research 
View details...

Memberships of academic societies
The Japan Wood Research Society 
The Society of Materials Science, Japan 
The Japan Society for Technology of Plasticity 
View details...

Committee or council involvement
日本塑性加工学会 編集委員会委員  2017/04/01-Present 
日本塑性加工学会 チューブフォーミング分科会委員  2016/04-Present 
View details...

Media coverage
Newspaper  日本経済新聞社  木の粉末 薬品使わず成型  2017/08/10 
View details...